check out my 3Dmark scores

[rlemieux]

3DMark Score 7998 3D marks

Game 1 Car Chase - Low Detail 125.2 FPS
Game 1 Car Chase - High Detail 49.6 FPS
Game 2 Dragothic - Low Detail 113.1 FPS
Game 2 Dragothic - High Detail 61.8 FPS
Game 3 Lobby - Low Detail 131.9 FPS
Game 3 Lobby - High Detail 63.5 FPS
Game 4 Nature 39.8 FPS

Fill Rate (Single-Texturing) 733.7 MTexels/s
Fill Rate (Multi-Texturing) 1520.0 MTexels/s

High Polygon Count (1 light) 25.0 MTriangels/s
High Polygon Count (8 lights) 5.6 MTriangels/s

Environment Bump Mapping 119.7 FPS
DOT3 Bump Mapping 115.3 FPS

Vertex Shader 60.9 FPS
Pixel Shader 84.4 FPS
Advanced Pixel Shader 68.0 FPS

Point Sprite 16.3 MSprites/s

PNY Geforce Ti200
Pentium 4 1.8A
512MB 16device Samsung Rambus

http://service.madonion.com/compare?2k1=3251136

[Ankerson]

That's not bad at all for what you have and the speed you are running. These are with a Gforce 3 Not the TI, the first one.


2177mhz

http://service.madonion.com/compare?2k1=3116404


2240mhz


http://service.madonion.com/compare?2k1=3127586


2294mhz


http://service.madonion.com/compare?2k1=3218935



Gforce4 TI 4400 P4 1.8A @ 2294MHz


http://service.madonion.com/compare?2k1=3237242

[rlemieux]

Just broke the 8000 mark with the new 28.80's

3DMark Score 8076 3D marks

Game 1 Car Chase - Low Detail 127.6 FPS
Game 1 Car Chase - High Detail 49.9 FPS
Game 2 Dragothic - Low Detail 113.9 FPS
Game 2 Dragothic - High Detail 62.4 FPS
Game 3 Lobby - Low Detail 133.4 FPS
Game 3 Lobby - High Detail 64.2 FPS
Game 4 Nature 39.8 FPS

Fill Rate (Single-Texturing) 732.5 MTexels/s
Fill Rate (Multi-Texturing) 1520.0 MTexels/s

High Polygon Count (1 light) 25.2 MTriangels/s
High Polygon Count (8 lights) 5.6 MTriangels/s

Environment Bump Mapping 116.7 FPS
DOT3 Bump Mapping 115.6 FPS

Vertex Shader 62.4 FPS
Pixel Shader 84.6 FPS
Advanced Pixel Shader 68.1 FPS

Point Sprite 16.3 MSprites/s

[Sweeper]

Your system is almost identical to mine? Your scores kill mine! The only difference is your FSB:112 compaired to my 100FSB.?

Pentium 4 1.8GHz
256 PC800 Samsung RDRAM
Asus GF3 TI-500
Barricuda 40GB HD

Score:7387

[Ankerson]

Originally posted by Sweeper
Your system is almost identical to mine? Your scores kill mine! The only difference is your FSB:112 compaired to my 100FSB.?

Pentium 4 1.8GHz
256 PC800 Samsung RDRAM
Asus GF3 TI-500
Barricuda 40GB HD

Score:7387

He is running at 112x18=2016MHz

You are running 100x18=1800MHz

So his CPU is running 216MHz faster than yours, thats why his scores are higher.

[Ankerson]

Sweeper,

My system Specs for my P4

P4 1.8A @ 2.3GHz 18x127 w/turbo on
Abit TH711 Motherboard
512mb PC800 RDRAM
GForce 4 TI 4400
WD 60g HD 7200rpm
Sondblaster Live 5.1
431w PSU


I was getting 8208 with my Standard Gforce3 (Not the TI), but my CPU is running 500MHz faster than yours. Your TI500 is alot better than my old Gforce 3.

[rlemieux]

I dont have a Ti500 I have a Ti200.

[Ankerson]

I know.

[rlemieux]

Originally posted by Ankerson



He is running at 112x18=2016MHz

You are running 100x18=1800MHz

So his CPU is running 216MHz faster than yours, thats why his scores are higher.

I was in the mid 7000 with out my CPU overclocked... I think it was like 7654. I am just really impressed with it. I am going to get some more out of it. I have to get a new HD cause my ATA66 wont let me overclock too high. Also I have to get some new heatsinks for my video memory before I try to go higher with it. Also thinking about relplacing my cystal orb with a Cooljag 1U cooler.

[Sweeper]

Just curious, my case has a 250w power supply? Shouldn't it be atleast 300w? I haven't been able to overclock the card very well. Hmmm... wonder if the PSU could be a little weak for the system....? I am assuming overclocking a video card would consume a reasonable amount of power?

[Ankerson]

rlemieux,

My Gforce 3 was always alittle on the slow side, never could figure it out till I changed to my Gforce 4 TI 4400.

My Voltage would jump all over the place when I had the GForce 3 in the Systems. When I changed cards they became very stable. So maybe my GForce 3 was defective in some way.

[Ankerson]

Originally posted by Sweeper
Just curious, my case has a 250w power supply? Shouldn't it be atleast 300w? I haven't been able to overclock the card very well. Hmmm... wonder if the PSU could be a little weak for the system....? I am assuming overclocking a video card would consume a reasonable amount of power?

Yeh a 250w PSU is alittle weak for your system. Get a 400w or better, you will notice the difference.

I recommend at least 400w min for your system, but get a good one like an Enermax, don't skimp on a power supply ever. They are not cheap, but they are worth every penny and they last forever.

I have 2 Enermax PSU's, a 431w, and 550w.

[rlemieux]

Originally posted by Ankerson
rlemieux,

My Gforce 3 was always alittle on the slow side, never could figure it out till I changed to my Gforce 4 TI 4400.

My Voltage would jump all over the place when I had the GForce 3 in the Systems. When I changed cards they became very stable. So maybe my GForce 3 was defective in some way.

maybe so, its one of those things like cars, there are lemons in every batch.

[Ankerson]

That's what I thought too, but it doesn't matter now. I have my GForce 4 TI 4400. Maybe I will RMA it.

[Sweeper]

Ankerson: Here's the info on my PSU:

Manufacturer: Delta/Astec
Model: NPS-250CBB/ATX250-3505-1412B Rev 01
Voltage: 115/230 V
Frequency: 50/60 Hz
Input current: 6.5 Amps at 115 VAC , 3.5 Amps at 230 VAC
Wattage: 250 W
Environmental Operating temperature: 0 to 50° C ambient
Operating humidity: 20 to 80% RH
Thermal regulation: +/- 2% per ° C
Shock: 40g (half sine), 11 ms shock
Vibration: 2 to 300 Hz, 0.25 g sinusoidal vibration
Mean time between failure 100,000 hrs. minimum excluding fan at full load (25° C)
40,000 hrs. minimum for fan only (25° C)

Here's the link to what it looks like:Here