I got 941
HP :mad: Pavilion 6630
500 celeron
191 mB
PCI Geforce 2 MX200 (Drivers that camez int he boxs)
WIN 98SE,
Don't no if my score is any good. BUt i well be geting a new system that i well build..............:)
Printable View
I got 941
HP :mad: Pavilion 6630
500 celeron
191 mB
PCI Geforce 2 MX200 (Drivers that camez int he boxs)
WIN 98SE,
Don't no if my score is any good. BUt i well be geting a new system that i well build..............:)
Go to www.driverheaven.net and look for better drivers they are out there.
My HP 6360 has onboard grafics and NO AGP slot, so it will not even run the 3D benchmark. Hey its workable for surfing, a good paperweight and even a conversation piece.
Good luck on your new machine! :)
Hi gen_hideki,,, if I were to X out that mad onion screenie would I see diamond head????????
Biostar M7VKD
Athlon XP 1600+
512 MB PC133
Geforce2 MX 100/200 64MB
WinXP
Score: 1579
maje87c
You should be around 3200 with your set up. Try using 23.11 drivers to see if can improve your score.
where would i get those?
Right here. If this doesn't take you straight to the dl page, just find the nVidia drivers page and find any dang driver yer heart desires!:cool: .
http://service.futuremark.com/compare?2k1=5315592
My latest with the new Thermaltake Spark 7 HSF
I'm running the fan at 1/2 speed (nice and quiet) and it still cools better than any other of the HSF's I've tried. Though I will admit, MSI does have a problem with there temp. reading on there boards. With the Thermal Sensor attached under the Heatsink next to the CPU *using it to determine the Fan speed / Heat* the Bios shows 43c while the Sensor obviously thinks it's much cooler because it sets the fan to about 1800RPM's......:rolleyes:
Well, here are my latest scores. I've included some other benches in the pic so you can look in there as well. This is my first stride into the 166FSB world; the CPU came unlocked :D
Drivers -- 40.72
Koolance Watercooling
EPoX 8-KHA+
AMD Athlon XP T-bred A 1800+ 1.53GHz @ 1.83GHz (1.65vcore, 166*11)
2x CL2.5 PC2100 DIMMs, Kingston and Samsung:
- CL2.5
333MHz
2-6-2
1.0 DRAM 0-1 timing
2T command rate
Continuous request - on
Fast R/W turnaround - on
voltage: 3.0v
PNY Ti 4200 64MB @ 293/621:
- AGP 4x enabled
83MHz AGP bus
1-WS R/W
Fast writes enabled
BTW I don't know why the pic says it's not run using the default settings, but, FYI It was at 0xAA, 0xAniso, Texture sharpening off, 24-bit buffer, 1024x768x16, vsync off.
Here's the link to FutureMark:
We are Go houston
It keeps losing my attachments :rolleyes: :mad: Here we go:
I think I'll be able to overclock my CPU even more with an nForce 2 mobo (8RDA+) and two 100 GB HDDs, both from WD and have 8 MB of ca$h :D Try to shoot for 166 FSB.
!! BONZAI !!
Your cooling system and CPU are the limits, not the mobo. :rolleyes:
Link to futuremark plz :tQuote:
Originally posted by Gen_Hideki_Tojo
Here you go, fellows. (I love to benchmark my system over and over again. I hope you don't mind. :) )
:xQuote:
(I love to benchmark my system over and over again. I hope you don't mind. :) ) [/B]
What is the 3d benchmark for linux operating systems, anyone?
Probably some open gl bench as linux canne use DX
--Jakk:t