Sound- interferences on loudspeaker-mouse-related-wixp-old HDD.

Was working on my old winxp-HDD to clean for backup. until no updates had been made there. was using an older Nvidia-software-version incl. sound.
dont use internal but sound-stick. maybe its software-related. there is a seperate software. will try that again.
have Wireless mouse. tried without prolonged cable both on a multi-pc-switch and cable on MOBO. does not make a difference. removed system-entries and Nvidia-driver/software. didnt help.
Perfect sound on new drive. usb-stick on a power-driven multi-usb-bar. the only device used there.

It could also be related to imperfect earthing to central-heating(the one under the window) pc2 is connected to pc1 also. at pc2 i had the perfect earthing cable attached but not yet plugged in to the wall. on pc1 no interferrences at all. i will exchange wireless mouse by a wired one first.

I remember a sound-driver-cleaning tool, train?
sound on other newer drive is perfect.

Sound cleaning tool.
The driver, remove in Device Manager.
The program , if it shows in Add/Remove, Geek uninstaller or Revo uninstaller is needed.

Whats the procedure? before installation revo must be active. would this be enough?
you mean sound must be removed with revo? but its integrated in nvidia driver. i was using an older stable version as you advised. maybe better updating then? first used the downloaded version from hdd then from CD. didnt help

The sound driver, to remove it, from with in device manager, thn reboot.

Test does the audio now work right?

cannot change HDD right now.
Which sound cleaner tool?
Have multiple audio in system-device manager
among them Nvidia
what to delete. better showing it. Its from the working hdd but its the same content(if i dont err...)
Attachment 9903

in usb-section it says unknow device. couldnt remove that.getting the right one.
maybe i need a usb-cleaner also.

Never seen or heard of a tool for cleaning USB or sound.

Remove all of the sound before rebooting, yes all of it.

defective sound_hdd
in the two images you see on right side usb-system-settings.
in OK-image one can see Cardreader(the external one i have also an internal cardreader) whereas in non-ok its not there. will

install the found software also there.
but maybe the interference comes from there despite reader being shutdown temporarily.
shortly before login noise is coming.
Different reg. Sound:
NON-Sound OK HDD:
USB-setting shows: USB-Massenspeichergerät
Sound-ok-HDD.
Audio-Setting shows: USB Pnp Sound Device
Thats why i could install driver which i cant in non-ok-configuration(other HHD).
Revo only showing Nvidia audio-driver.
I will now first install cardreader and trying to install sound-driver. Should i remove USB-Massenspeichergerät first on Non-ok

drive?
Ok HDD first then NON-Ok-HDD:
Attachment 9905
Attachment 9907

Alcor external Cardreader now active again in settings. Twice now. does that matter? last time when disactivated and removed only one entry.

As long as it works, I would live with it.

What do i have to remove before reinstallation of usb-sound-stick-driver?

Just follow the on screen directions / prompts.

Which windows -system-settings do i have to remove prior to deinstallation of nvidia audio-driver?
see screen-shots of faulty and non-faulty drive

None. I have for years, just removed all the bad drivers, then rebooted.

i dont know what are the bad drivers and where they are.....

That is why we remove everything in device manager, once everything is removed, we reboot.
Windows should pick it up as new hardware and reinstall the drivers.

I have been using that trick since Win 98. And XP had the nasty habit of double installing drivers once in a while, which can only be seen in safe mode.

Yes thats what i thought.
Though also about deactivated hardware-accelerator. had to do when windows-mediaplayer screenshots were not possible anymore. later found out i could activate again.
maybe best removing all entries not only in audio but also USB. better removing stick beforehand and setting it back after standard-driver DL?
Its on power-driven PORTS USB 3.0 Highspeed-Hub on usb 2.0 only pc.

That looks like the correct procedure.

Have found driver cmedia 6501 and found out that its USB-audiogerät
When using setup for driver-installation its telling remove device and install driver but refused installation again.
So i deinstalled the device in system and tried to find the inf. none of the 4 options i have are working.
i remember that the same installation worked in perfect HDD but not here. I still hear a crackling in speakers. All i did in the meantime when working again on that bad drive was exchanging speakers. when moving mouse i can hear that in the crackling.
Nvidia driver could lead a role. maybe removing the audio-part?

I am on the working PC, where soundstick worked. But its dead now. no light anymore.
so i switched to MOBO-sound by reactivating in Cmos. could then also install CM 6501-driver.
Set the right Nvidia Audio-device but still no audio-files-sound from WMP.
only hear systemsound when entering account.
yes also reinstalled Nvidia driver. audio integrated there.
what can i do more? How about a cmos-reset or reflashing?
Thanks
new soundsticks coming
Sound again:
some songs hadnt sound at start....

Background of using Sound-stick was defective MOBO-connector on a second MOBO.
Was unplugin Speaker then to use headphone. later found out that speaker has a headphone-plug....
but that cable was wobbly and new speaker hast no plug for that....
but stick has both.