seems to be working ....
now i need to know the average temp for stock amd k6 2 400
used outside edge of original cap
made copper top
used silver compound
no smoke!!!!
jb weld to bond
whats top o/c speed for 400
lets rock!!!!!!
jim
Printable View
seems to be working ....
now i need to know the average temp for stock amd k6 2 400
used outside edge of original cap
made copper top
used silver compound
no smoke!!!!
jb weld to bond
whats top o/c speed for 400
lets rock!!!!!!
jim
With stock heatsink and fan 40-45C, but often closer to 50C.
Most o/clocking success seems to be around 500/525 with some at 550.
If you can get that chip below 35C you should be able to add a few mHZ beyond what you would get with an average cooling set-up. I am stable at 5*110/2.7v AFX core with Asus Probe measuring 32C.
I have my K6-2 400 at 5*95 2.5v with a larger heatsink and 2 small casefans, running Rain. Enjoy! http://www.sysopt.com/forum/biggrin.gif
[This message has been edited by narayan (edited 02-24-2000).]
this may sound stupid, but is the K6 II a 66 MHz bus stock?
The K6-2's that used a 66Mhz bus are: 266,300,333,366. The 333 also used a 95Mhz bus. All others use either 95 or 100. http://www.sysopt.com/forum/smile.gif
[This message has been edited by narayan (edited 02-24-2000).]
thanks