The highest you have overclocked and it was Stable

[gibsinep]

For all you over clockers post how far youy have OC your chip STabily

1. dont lie
2. Put mobo and processor.
3. Put temps



I just started OC my t-birs 1.33 i have it runnin at 1400mhz.
temps. idle 34C full 37C
MOBO AK75-EC (DFI)

will do some more overclocking tonight will post what i get up to.

I have a question also. How ill i kno when to up the voltage

[Shent]

Ok 1.4 athlon
KG7 mobo
Crucial 2100
400w psu

1.6 (10x160) 100% stable temp 42/47
1.62 (10x162) 98% stable temp 42/47-48
1.53 (9x170) 95% stable temp 40/44

there u go m8e
no lies and i can tell u exactly wot they are cos i wrote em down
But i normally run at 10x150.

[Kurylo]

800MHz @ 1.0GHz P3 Coppermine
MSI MS6337LE5 (i815EPT) mobo @ 166MHz
PQI 2x256MB PC-133 CAS333 @ 166MHz CAS232
250W PSU

CPU is 32C idle and 54C full load using CPUBURN.

... and all this stuff is 101% stable.

[arn]

600 celly @ 990
32C idle 36 load
Abit BE6
3 fans on cpu, 8 total
250 watt psu

:D :D :D :D

arn

[silverfish51]

here ya go:
http://www.sysopt.com/cgi-bin/overc/readfull.cgi?record=10528

Intel cele 1.1
Aopen AX34 pro2 mobo
512 crucial ram @ CAS2

It's @ 1.2 at the moment (23ºC) with the intake and extractor case fans on.) Have had the chip running @ 1.3 stable for a few weeks (27ºC / 30ºC,) but backed down because I just didn't like the idea of running 1.9v through it.

~
Silver

[gibsinep]

wow i hope i can get somemore out of my t-bird. How will i know when to add more voltage

[Ifishsum]

600celly@1030 1.95v
Abit VT6X4
aircooled with a lapped Gorb
idle 30c full load 36-38c when int temp is around 68f

[WyreTheWolf]

1.4GHz Athlon T-Bird @ 1.68GHz (12*140) 1.80vdc Core voltage
JetWay/Elements 866AS-R Ultra KT266A
http://www.elements-pc.com/mb/866asr/866as.jpg
OCZ Performance DDR (Blue color-ICE)
Thermaltake Volcano6 CU w/ Delta black label fan (38cfm) LOUD!
Arctic Silver II

Idle temps: 34*C

using CPUBURNK7
Load Temps: 51*C

~Wyre

[WyreTheWolf]

Originally posted by gibsinep
wow i hope i can get somemore out of my t-bird. How will i know when to add more voltage

When you start getting unstable ... but, your temps are fine.

[Seph]

PIII 450@629 139FSB (SingaPore orig. 600 lowered multiple to 4.5 :( )
ABIT BE6-II
HERCULES GEFORCE DDR
SAMSUNG 2*64MB PC100 CL2
HS and 5 Fans
Temp: 45-55 C

With lower RAM stability and glitches (The window open and in the winter)
PIII 450@657 146FSB
SAMSUNG 1*64MB PC100 CL2
Temp: 14C :) It was freezing outside

[Kurylo]

Yesterday I've reached the 1.1GHz (183FSB) at 800MHz P3 Coppermine cC0 programming my PLL-IC frequency clock generator with a CPUCOOL tool. And it's stable.
190MHz sucks (but not CPU, it seems like memory or video crashing).
Maybe, something like between 183 and 190 will be stable, but I don't want to experiment - I've got bored with it.

[Ammok]

1.4 TB @ 1.533 @1.825v
temps 42/47c
MSIK7T-266-Pro2 lite

[suprsheep2]

766 Celeron @ 1.1Ghz stable
512MB
GF2 TI500
TEMPS = 25C at idle 35C at full load

[silverfish51]

wow i hope i can get somemore out of my t-bird. How will i know when to add more voltage

When you start getting unstable ... but, your temps are fine.



Yeah, if it will still post but is unstable, then raise the core voltage a little. I always go up in 0.5v steps, the lowest my mobo will allow, keeping an eye on the temperatures.

My Celeron runs at 1.75v, but I had to put it up to 1.9v to get the FSB to 118mhz. I wouldn't go any higher because I was afraid that more power would damage the chip.

~
Silver

[Mr. Thompson]

Week 23 1333 MHz AYHJA Bird at 1718 MHz, 2.1 Vcore with dual 120 watt pelts. Motherboards include a KT7A-R and Iwill KK266 Plus. The system has been running rock solid since June of 2001. The temps are meaningless since they were measured with a in-socket thermistor.

[Ricardo]

PIII 600E (SECC2) running at 900 (150x6) at nominal voltage (1.7v). MoBo is one Asus P3V133. Temperature right now: 32 c° ! :D

[gibsinep]

Well thx for answering my question on voltage. Silver
I havent had any time to do more oc hopefullt this weekend.

[Slapshot]

1700XP+
1467 @ 1610
K7S5A ECS board
Using CPUFSB
146.6 FSB
Rock Stable

Planning on unlocking the chip and going for more this is about as high as Im going on FSB with this mobo.
Also im still using PC133 Memory:rolleyes:

Slapshot

[araaraara]

AthlonXP 1600
1.4ghz @ 1.6ghz (152mhz fsb)Rock Stable
Mostly stable @ 1.7ghz.
Max VCore (1.850v)
Volcano5 with thermal pad!
MSI K7T266 Pro2

By overclocking my 1600 to a 1900, I saved myself $250 Can!!!

[Kurylo]

What the thermal pad is?

[WyreTheWolf]

Originally posted by Kurylo
What the thermal pad is?
The Thermal Interface Material.... the goooey pink, grey (or some other color) stuff that manufacturers have been mounting on the bottom of heatsinks. The stuff basically sucks for thermal transfers above 65watt... which means no overclocking for you.

[lildude]

Duron 750 @ 1012 (1.75v)
ASUS A7V266-E mobo
36C idle (sitting for an hour)/41C full load (hour of quake3)

[Hui]

Shuttle AK31 Motherboard
AMD 1.4 GHz CPU
512 MB Samsung PC2100 DDRRAM

Zen Cooler...OC'd to 2.2 GHz, and it booted!
Zen Cooler...Oc'd to 1.85GHz, stable for 2 weeks, 4 days, 22 hours...so far.

cpu temp...53C
case temp...37C

[compfreak2002]

Pentium !!! 450 @ 608mhz very stable with linux 4.5x 135mhz
2.3 volts
ABIT BF6
512 megs PC133
SuSE Linux 6.4

Volcano II Socket A heatsink on a Slot 1 proc. :D 2 60mm fans

idle temp. 78F
full load 96.7F

[Kurylo]

A question to Hui: I wanna buy Athlon 1.4GHz, which, as you say runs with Zen Cooler at 1.85GHz or an Athlon XP 1600+, which is running really at 1.4GHz, but I don't know the limit of OCing. Mostly I saw that those Athlons OC only t0 100-200MHz more is that true?

[tepo]

Answer to Kyrulyo: Nope, they can OC more.

TB 1200/266@1530 Vcore 2.15
TT Volcano II 60
MSI K7T266 Pro2
256 DDR

CPU Temps ~ 50 - 55 'c

http://cp-geek.servepics.com/pics/bench/1530_cpuid.jpg

Tepo :)

[masta_ray01]

here are my specs,

ECS K7S5A (SiS 735 chip)
Duron 750Mhz@ 1160Mhz (1.85V)
Azen 256MB Sdram @PC1

I have the fsb running at 155 and the multiplier is at default, 7.5x.
My tempratures are as follows:

Idle @40'C, Full @ 45'C

btw, the highest I seen the temp reach was 48'C. That was after playing 2 hours of UT.

[Picard]

Celery (PII in Disguise) 1.2 @ 1.6
133x12
1.575 V.
100% stable.
Not tried higher.

[missiveusa]

Athlon 1200MHz C @ 1400
140 MHz X 10.0
Iwill KK-266+
Micron PC-133 CAS2 @ CAS3
42C under load

Hey Picard: How'd you change the multiplier on your Intel chip?

[Ammok]

He didnt. 100 x 12 = 1.2 as he said. FSb gone up to 133.

[Kurylo]

Huh. But what about SSE?

[WyreTheWolf]

Hit a new high today! Using a 115watt peltier under the Volcano6 Cu... 1.4 Athlon @ 1.776 (12*148) vcore 1.85vdc

[Ammok]

Whats the temp Wolfie, and have you got a 3D benchmark with yet?

Have you seen the Zen Radiator Cooler yet?

[WyreTheWolf]

Originally posted by Ammok
Whats the temp Wolfie, and have you got a 3D benchmark with yet?

Have you seen the Zen Radiator Cooler yet?

Surprisingly it didn't make much difference in my score. I went from 1.68GHz to 1.776 and it just doesn't make much difference. Maybe it would with a Radeon 8500 ... but, not with my 7500.

No I haven't seen the cooler that you speak of... Do you have a link?

[pezcore64]

p3 650(100mhz FSB) @ 910 (140mhz FSB) v1.80 w/thermtale golden orb
Asus p3b-f motherboard
256 MUSHKIN REV3+ CAS2 pc133 SDram @cas3
128 unkownbrand pc133 @cas3
GeforceMx @220/210 w/blorb

go to the following pages to view Sisoft Sandra Pro Benchy Snaps

michaelfanclub.50megs.com/cpu.jpg

michaelfanclub.50megs.com/multi.jpg

michaelfanclub.50megs.com/mem.jpg

Oh, and CPU @ Idle temp is 73F/23C(usually gets in the 80sF under load)
same for the motherboard chipset pretty much(73F/23C)
as taken from Motherboard Monitor 5

[Ammok]

WOLFIE

here the best one I could find

http://www.theoverclockingstore.co.uk/productinfo.php?codeid=800564

you just gotta be impressed.

[WyreTheWolf]

I remember seeing this ... It is basically a very small heat pump.

Three things:

1)Pray that it will fit!

2)Install more case fans to help move the super heated air out of your case.
3)BUY A SHIM!!!!!!!!!!!!!!!!!!!!!!!! Nonconductive is best.

[Bizkitkid2001]

Athlon T'Bird 1.2 ghz at 1.333 (133MHz*10) I will try to get some bench marking scores later.

[Bizkitkid2001]

OK Here is my benchmarks from Sandra

[Bizkitkid2001]

Here are my benchmarks

[dividedsoul]

I have my 1.33 running at 1.55 with an idle temp of about 34 and a load temp of about 37 using 3dmark2001. My mobo is a soyo dragon+. Fsb set at 155 with the multiplier set to 10. I can eek more out of it but really see no difference so I dropped it down for a more stable environment. Using a thermaltake copper heatsink and a delta 60*60*38 fan tha rotates at a whopping 8000rpm's.

:cool: AMD Rules!!:cool:

[dividedsoul]

oh yeah voltage is a 1.84

:cool: AMD Rules!!:cool:

[gibsinep]

AMD does rule

[Slapshot]

Hey Kid what version of Sandra was that??

Slapshot

[WyreTheWolf]

Originally posted by dividedsoul
Using a thermaltake copper heatsink and a delta 60*60*38 fan tha rotates at a whopping 8000rpm's.


AHHHHH! The Delta "Black Label"

Very loud! 49.5 db !

But, I will have to say that they do the job!

[dividedsoul]

had to have it, sounds like a jetliner in here but its all good. You just learn to ignore it.

[Bizkitkid2001]

Slapshot: Sandra 2002

[Bizkitkid2001]

Here is another Bench Mark from Sandra 2002. It it over clocked a little more to 1.36 GHz instaed of 1.33

[Saarak]

I've overclocked my home Celeron 533@826 yet it is not stable and the temperature is very high but it works perfectly @ 733 mHz you can read more about overclocking a Celeron in overclockin.com

[WyreTheWolf]

Originally posted by Saarak
I've overclocked my home Celeron 533@826 yet it is not stable and the temperature is very high but it works perfectly @ 733 mHz you can read more about overclocking a Celeron in overclockin.com

no no no no ... go to www.octools.com and check out "mission submersible" now THAT is the only way to overclock!

[Saarak]

Thanks for the tip man but I was talkin about the specific case with my cele

octools.com Rox and I've been hanging there for some time too

[WyreTheWolf]

:D You have to admit ... mission submersible is just toooo kewl!

I want to do that to my 1.4GHz T-Bird!

[Saarak]

You'll need one hell of a heatsink man

BTW do you have an ICQ No

[WyreTheWolf]

I for some strange reason cant use ICQ ... the only messenger that seems to work well with WindowsXP is MSN Messenger ... ( I wonder if Microsoft had something to do with that....?) Anyways you can find me on MSN Messenger WyreTheWolf@msn.com

[WyreTheWolf]

Originally posted by Ammok
Whats the temp Wolfie, and have you got a 3D benchmark with yet?

Have you seen the Zen Radiator Cooler yet?

Ammok, Read this review! overclockers.com tested the Zen heatpipe against the Coolmaster HHC-001 (which is the heatsink that replaced my Volcano6. Click here for review. (http://www.overclockers.com/articles530/)

The Zen cooler didn't do too well.

[WyreTheWolf]

And while your at it ... read This (http://www.overclockers.com/articles472/) one.


I don't think I want one of thes "zen cpu radiators" looks to be too much trouble for what it is.

[Ammok]

Looks good, though.

I don't think I would be too happy with several peices of Tbird in my "learning experience" graveyard.

A bit heavy as well, 310 grams. As Hoot says, promising technology, but I'll wait a while longer before I buy.

That cooler master looks tempting.:D especially as LN looks just a bit dangerous for me.

Thanks for the info Wolfie.

[WyreTheWolf]

As I said ... the HHC-001 performed VERY well, and it performed better than my Volcao6 CU+ ... that is the reason why it now resides in my system.


I would highly recommend it.

[Ammok]

I would you know, but I just got a 60gb Maxtor and my wife hates computers. I'll need to wait a bit.

But your advice is good.

[pmasley]

This is what I have running at the present.

PIII800 Coppermine @ 992
Amptron SE 440BX (verB2)
30 C @ idle and 38C at full load

[WyreTheWolf]

Well my 1.4GHz AMD Athlon (ThunderChicken) is running @ 1.78GHz with a load temp (running Folding @ Home) for 8 days straight ... is 47*C! I think that is a very stable temp.

[Quazar]

Have you all seen this?

http://holicho.lib.net/bench/pi104_047.gif

[WyreTheWolf]

Yeppers, I have seen that. Nothing overclocks as well as a processor huffing liquid nitrogen!

[lefou]

MB: ABIT ST6
CPU: Celeron 900/100, 128 kB L2 cache
256 Mb SD RAM Samsung PC 133
Video: GeForce 256

Now running at: 1.1 GHz, 122 MHz FSB, 4:4:1, 1.825 V core
Temperatures: no load: ~35 deg. C, FULL LOAD: ~54 deg. C max
Cooling: Spire Copper BB Fan, 3000-6000 rpm depending on CPU temp. and load (using SpeedFan 4.02, www.almico.com)

No problems up to this moment.
Tests: SiSoft Sandra Burn-In, CPU, CPU Mult., RAM:
5 hours, 150 turns
CPU benchmark: 2900 MIPS, 1460 MFLOPS | PR 1333 (Sandra)

That's from me.