//flex table opened by JP

Click to See Complete Forum and Search --> : Cooling my AT case - any suggestions?


LA
06-29-1999, 05:45 PM
I am considering a cooling system to better circulate air the in my AT case and take the heat out. I would appreciate some guidelines and recommendations.

Roy
06-29-1999, 06:23 PM
My ATX case runs cooler closed than open with a Comair-Rotron Flight LT CR0812UB-A71GL from Newark Electronics. ATX case fan size 3.15"sq x 1" thick. 50 CFM about $12.

It provides the most air movement I could find for the size. Some PS fans are this size, and that might be a place to mount it if your case does not have separate fan mounting.

KillerBug
07-02-1999, 05:15 PM
If you have a big one, odds are it has room for 1 or 2 120mm fans, put some top-of-the-line ones in there, if it does not, put lots of 80mms in there, every case is different, so let no one tell ya what to do.