Need to set my AMD to it's stock speed.

[harshadeep]

Any clues on how to set my AMD CPU to it's stock speed. This is an AMD Athlon 1 GHz Processor. I need to do this to get rid of the "DRIVER_IRQL_NOT_LESS_OR_EQUAL" error.

Regards,
Harsha.:confused:

[Imperion1]

Depends on the motherboard.
Does the motherboard use jumpers, dipswitches, or bios to set the cpu speed?
Also, is the cpu a 1G (200fsb) or 1G (266fsb)

10 x 100 (200fsb) = 1000 or 1G
7.5 x 133 (266fsb) = 997.5 or 1G

[harshadeep]

Imperion!

Thanx for showing interest.

This I suppose should be a 7.5 x 133 = 997.5 and a VIA KT 133 chipset which I suppose again is one of the very few Socket A motherboards which will allow you to adjust your CPU speeds.

Is there any other info that you require?

Regards,
Harsha.

[Imperion1]

Motherboard manufacturer? Your motherboard manual should tell you how to set the cpu cpeed.

If you have a 266fsb cpu, set the multiplier to 7.5 and bus speed to 133.