//flex table opened by JP
PDA

Click to See Complete Forum and Search --> : P3 450 overcloaking

pigasos
11-27-2001, 05:04 PM
Hi guys
I have a P3 450 Katmai based on an elite group motherboard which uses via chipset
What r my chances on overcloaking say like up to 600 f.e.
thx in advance
Buji
11-27-2001, 06:16 PM
http://overclockers.cssftware.com/cpudb/index.cfm
Spencer
11-27-2001, 10:07 PM
I think your chances are quite good with good cooling and a little voltage tweaking. Don't exceed 2.2v though. Beyond that you're risking a melt down. I had my Slot 1 P3 500 up to 620@2.2v. Good luck.
pigasos
11-28-2001, 01:02 PM
thx for the help guys ...last question in the database i found thaT i have to turn the cpu voltage to 2.20, does that mean thats the only thing i must do? is my fan able to support this?? thx again
pigasos
11-28-2001, 01:06 PM
Originally posted by pigasos
thx for the help guys ...last question in the database i found thaT i have to turn the cpu voltage to 2.20, does that mean thats the only thing i must do? is my fan able to support this?? thx again

changed the voltage to 2.20 and set the cpu speed at 600 mhz

no difference what am i doing wrong??
Spencer
11-28-2001, 09:48 PM
Did you change the FSB to 133? The multiplier is locked. Does it boot? What do you mean by there's no difference? Do you have PC133 SDRAM?