Problem with startup, athlon 1ghz regestered as 750mhz

[Linkin' Park]

hi, i was woundering if you n e 1 could help me as my 1ghz athlon show as a 750mhz athlon at startup, is there some way to change this?

Thanx in advance

[cavill]

hi
download sisoft sandra and run it see if that tells you what your cpu is running at
(my bios screen says p3500 but its actually a p3 800 and sandra verifies this)

what motherboard are you using?
is it a jumperless board?

check your manual to see if you need to change any of your jumper settings as this will determine what speed your cpu will run at

if your mobo uses a programme like softmenu you would be able to change these settings a lot easier in the bios

try posting this in the cpus section and someone will be able to be more specific on how to change your fsb etc

[NDD]

You currently running your CPU on 100MHz FSB (100x7.5=750). You must switch to 133MHz FSB (if your mobo supports it) to be able to run this CPU at it's default speed (133x7.5=~1000).
Check your manual for needed jumpers/BIOS configuration changes.

Best Regards ...