POST YOUR 3DMARK2001 SCORES!!!!

[Braiii]

My score on 3DMark2001se is 10179. :D

Athlon XP 1800+ @ 12.0x148
ASUS A7V266-E
512 MB of DDR pc2100
Maxtor 20Gig 7200 RPM
VisionTek Ti 4600 128mb GeForce 4
SB Live! 5.1 Platinum w/JBL SCS150SI
Pioneer 16x Slot DVD
HSF Thermal Take Volcano 7+

10179 (http://service.madonion.com/compare?2k1=3118591)

[Nemesis1s]

Hmm some guys with the same config as me are score pretty low, or me just high :)

P III 733 Mhz
MSI-6309
7200 RPM 40 Gb Seagate ATA 100 (at 66)
512 Mb SDRAM PC 133 Mhz
MSI Geforce 2 MX400 64 mb

3DMark 2001 Score: 2260

[namrak]

Nemesis1s, your low score is primarily attributed to your MX video card. They are the pits because of their limited memory bandwidths. One of my machines is a Pentium III-500@575 and scores a 4078 with an overclocked GeForce 3 card. Here's a URL to take a look at some numbers for this particular rig. http://service.madonion.com/compare?2k1=2513623
Its amazing how much of a difference a high end gpu versus a lower model makes in terms of benchmarks and fast gaming. Depending on what kinds of games you play, you could probably stick it out with your PIII-700MHz processor. But if you like to have high benchmarks and astronomical frame rates in first person shooters, you'll need to upgrade your processor, video card, memory type and your mobo. Ah well...its all a game to me. Cheers!

[NOHTO]

3D Mark 2001 SE SCORE 10400
I am running an Abit KG7R mobo with 4 Maxtor ATA 133 20 gig. hd in striping 0. XP 1700 (1460 normal) o.c. to 1752MHZ, 512mb pc 2100 mushkin high performance ram, Gainward Ultra/750 XP 128 MB DDR GeForce 4 Ti 4600 vid card and a KooLance watercooler with 4 hard drive watercoolers. chipset cooler, ran thru a refrigerated cooler to keep temp at 35 degrees F. Haven't water cooled vid card yet, just got it and I need to figure out how to cool ram sinks before I do.



CLICK HERE FOR MY 3D MARK SCORE (http://service.madonion.com/compare?2k1=3166153)

[Braiii]

Unfair challenge...I'll have to see if I can top that...I just might have a few tricks up my sleve! ;)

:( I wish I could keep a constant 35c....one day, one day. :p

[NOHTO]

Thats farenheight (SP?) not celcius, and try using Win 98 not 2K or XP.
Have you ever checked into using a peltier or a shim or both? I can lower my temp on the coolant but I can't dissapate any more heat with the limited contact surface from the processor to the heat sink.

[Braiii]

My score on 3DMark2001se is 11022.

11022...mmmm, feels good..lol

- Rob

Athlon XP 1800+ @ 11.5x149
ASUS A7V266-E
512 MB of DDR pc2100
Maxtor 20Gig 7200 RPM
VisionTek Ti 4600 128mb GeForce 4
SB Live! 5.1 Platinum w/JBL SCS150SI
Pioneer 16x Slot DVD
HSF Thermal Take Volcano 7+
Windows XP Professional

Click here for 3DMark2001se score - 11022 (http://service.madonion.com/compare?2k1=3192137)

[NOHTO]

3D marks 11901


My new score!!!!!!!!!



CLICK HERE FOR 3D marks (http://service.madonion.com/compare?2k1=3204086)

[Braiii]

Looks like we have a heated race or I should say battle..let's keep it going and get to 12k! [*-deleted word-*] your Abit board!!! ;)

- Rob

(*** Polite language only please *** - WSUA (http://www.internet.com/corporate/legal.html) 3. a.)

[NOHTO]

I,m game!!! Hey the A7V 266E isn't no slouch either. I would of still had one if I wouldn't of bought the 266 without the enhanced memory. They released the 266E 2 weeks after I bought mine and it pissed me of and I went with Abit instead.

GOOD LUCK!!!!!!!!!

[WayneD]

Upgraded video card in A7M266 with ATI 8500 running AMD Athone XP 2000 resulting in a 3D Mark 2001se of 8633.

[more_power]

P4 1.8
512MB DDR
GForce4 TI4400

3DMark2001=8082

[Braiii]

Okay, okay...NOHTO what did you do...you were just above 11k now you're almost at 12k. What did you do differently?

Thanks
- Rob

Athlon XP 1800+ @ 12.0x148
ASUS A7V266-E
512 MB of DDR pc2100
Maxtor 20Gig 7200 RPM
VisionTek Ti 4600 128mb GeForce 4
Sony CPD-G420S Trinitron - Flat screen
SB Live! 5.1 Platinum w/JBL SCS150SI
Pioneer 16x Slot DVD
HSF Thermal Take Volcano 7+
Windows XP Professional

"Einstein grew a brain, why can't you?"

Click for my 3DMark2001se score - 11022 (http://service.madonion.com/compare?2k1=3118591)

[BJUK]

1GZ ATHLON kt133a Via chipset. 512mb Ram G3 ti200 Vid
Score 6210:D

[ipruul]

Celeron 600@750MHz
320 MB SD-RAM 133
Quantium fireball 7200rpm 13.9 GB
Winfast GeForce 2 Titanium 32MB (250@270/420@470)
Windows XP pro
52x Liteon CD

3D Mark 2001 SE - 1765 :(

[Ankerson]

P4 1.8A @ 2.3GHz 8184


PNY Gforce 3 (Not the Ti, The first one)



http://service.madonion.com/compare?2k1=3211660

[NOHTO]

NEW 3d MARKS 2001SE 12240

Abit KR7A-RAID

4 Maxtor ATA 133 20 Gig. H.D. Striping 0 Aray

512 MB DDR PC 2100 High Performance Mushkin Ram

Gainward Ultra/750 XP 128 MB DDR GeForce 4 Ti 4600 vid card

KooLance watercooler with 4 hard drive watercoolers, chipset cooler, video card cooler

Windows XP Pro

CLICK FOR UPDATED 3D MARK 2001SE SCORE (http://service.madonion.com/compare?2k1=3323940)

[prototypeJedi]

Score: 6469

P4 1.8A "Northwood"
256 DDR RAM
GeForce3 Ti 200 OC:cool:
Win2k

[Beeblequix]

I changed drivers from dets 23.12 to 23.11 and my score is now
7029 .

AthlonXP 1700+ (slightly oc'ed by switching from autodetect to manual in bios making it run at 1477, up from 1466)
a7v266-e
256 meg pc2100 at 2-2-2-5 settings
MSI g3ti200

Overclocking the video card I can acheive much higher results (the other day I got over 8k) but I'd rather find more minor adjustments like better dets, using performance instead of quality settings, etc.

cheers,
Beeble Quix

[Sweeper]

P4 1.8 Willimette
256 PC800 Samsung RDRAM
40GB Barricuda ATA100 HD
GF3 TI-500

Your Score:7888

[kazuza]

ASUS CUV4X-E with PIII 1GHz
Elsa Gladiac 511 TV-OUT 64M (GF2MX400...)

3DMARK2001PRO=2372

[smelanson]

Score 3270

PIII 1GHz
MSI Geforce II 32Mb GTS
512Mb of RAM
Windows XP

[But_Why]

OMFG is this thread still going?
Hahaha... thats crazy!!

[TweakerXP]

I posted way back on the 15th page ...can we ever kill this thing???

Is like an old horror movie !! The HEAD without a body!!:eek:

It just never dies.........

[hoodedrat]

ECS k7s5a
WD 40 gb 7200
384 crucial/kingston ddr pc2100
Radeon8500LE 128
WinXP pro
Tbird 1.33

7803 3dmark 2001 score :mad:

[uncle_jimbo]

1.8AGhz Pentium 4
256mb PC2700
40Gb Seagate Barracuda
Gigabyte GA-8SRX
Windoes XP Home
128Mb GeForce4 Ti 4400

3DMark 2001SE - 10248

Nothing is overclocked.

-- uncle_jimbo

:D score=6800:D


PIII 1.26 Tualatin
3DPower Morpheus Ge-Force 3 Ti-500
AsusTek TUSL2-C
S/B Audigy Platinum
Crucial 512MB PC133 CAS2
40GB IBM IDE
20GB Seagate IDE
Noise Control Silverado CPU Fan
CoolerMaster ATC201
Enermax 350w PSU
Pioneer A06s DVD
Yamaha CDR 8x4x24
Win XP pro

[snowfall]

i forgot if posted here or not, cant be bothered to check..
here it is:

Winfast Gf3 Ti 200 @ 227/450- 7023

[Sweeper]

P4 1.8 GHz @ 1.8GHz (100 FSB)
256 PC800
I850 MB
GF4 ti4600
3D Mark 2k1 Score: 9760

[j_hottes]

a 6260...... @215/456 gforce3ti200

1.1gig athlon
k7s5a mobo
20gig maxtor 7200rpm 100ata
256meg ocz pc2400 ddr
this is my fist time i have over clocked the card. no oc it was a 5800 score
@210/450 it got a 5998 then i added a 5 to each and it jumps to 6260...... @215/456 gforce3ti200 ? odd jump? i did add a big f#@King fan blowing on my card. maybe it need to be cooler
thinking about overclocking cpu if i can ... just to see what i can get. anysuggestions on how to oc my cpu?

i just increased my fsb 294mhz and ram to 294mhz. runs cool my processor is now 1.25gig not a big jump. but its stable. i gotta 6677 big deal :(

[holdenfreak]

64Mb ASUS Geforce 2 Ti - 4892 3D Marks

[jorge3]

3DMark 2001se---> 11113 is that good? ;p


http://service.madonion.com/compare?2k1=3488310

[NOHTO]

You have to use the default settings or it doesn't count.




3d MARKS 2001SE 12240

Abit KR7A-RAID

4 Maxtor ATA 133 20 Gig. H.D. Striping 0 Aray

512 MB DDR PC 2100 High Performance Mushkin Ram

Gainward Ultra/750 XP 128 MB DDR GeForce 4 Ti 4600 vid card

KooLance watercooler with 4 hard drive watercoolers, chipset cooler, video card cooler

Windows XP Pro

CLICK FOR 3d MARK 2001SE SCORES (http://service.madonion.com/compare?2k1=3323940)

[.yy.]

athlonxp1900+(200X8) epox8k3a kingmax512MDDR333 cas:2.5
gainward gefoce3 Ti200(275/575)

[NOHTO]

NEW 3d MARKS 12347
CLICK HERE (http://service.madonion.com/compare?2k1=3574839)
Epox 8K3A+ AMD 2100+ O.C. TO 2028 MHz
4 MAXTOR 20 GIG. ATA133 H.D. IN STRIPING 0
Z4 WATERCOOLER AND VID COOLER
2 KOOLANCE H.D. COOLERS
GAINWARD G.F. 4600 GOLDEN SAMPLE
256 MByte CORSAIR ultra-perf DDR WATERCOOLED WITH 2 AQUA SINKS
SiSoftware Sandra Professional
<<< CPU Arithmetic Benchmark >>>
------------------------------------------------------------------------------------------------
< Benchmark Results >
Dhrystone ALU: 5605MIPS
Whetstone FPU: 2808MFLOPS

<<< CPU Multi-Media Benchmark >>>
------------------------------------------------------------------------------------------------
< Benchmark Results >
Integer aEMMX/aSSE: 11002it/s
Floating-Point aSSE: 12892it/s

<< Memory Bandwidth Benchmark >>>
------------------------------------------------------------------------------------------------
< Benchmark Results >
RAM Bandwidth Int Buffered aEMMX/aSSE:2843MB/s
RAM Bandwidth Float Buffered aEMMX/aS:2617MB/s
WOW WHAT A DIFFERENCE THE GOLDEN SAMPLE MAKES!!!!!!!
First run with FSB and multiplier lower than usual I will beat that score no problem. Price was only $364.00 at New Egg ONLY $349.00 TODAY (http://www.newegg.com/app/ViewProduct.asp?submit=manufactory&catalog=48&manufactory=1387&DEPA=1) comes with a (3+1)-port IEEE1394 firewire card also.

[NOHTO]

NEW 3d MARKS 12347
CLICK HERE (http://service.madonion.com/compare?2k1=3574839)
Epox 8K3A+ AMD 2100+ O.C. TO 2028 MHz
4 MAXTOR 20 GIG. ATA133 H.D. IN STRIPING 0
Z4 WATERCOOLER AND VID COOLER
2 KOOLANCE H.D. COOLERS
GAINWARD G.F. 4600 GOLDEN SAMPLE
256 MByte CORSAIR ultra-perf DDR WATERCOOLED WITH 2 AQUA SINKS
SiSoftware Sandra Professional
<<< CPU Arithmetic Benchmark >>>
------------------------------------------------------------------------------------------------
< Benchmark Results >
Dhrystone ALU: 5605MIPS
Whetstone FPU: 2808MFLOPS

<<< CPU Multi-Media Benchmark >>>
------------------------------------------------------------------------------------------------
< Benchmark Results >
Integer aEMMX/aSSE: 11002it/s
Floating-Point aSSE: 12892it/s

<< Memory Bandwidth Benchmark >>>
------------------------------------------------------------------------------------------------
< Benchmark Results >
RAM Bandwidth Int Buffered aEMMX/aSSE:2843MB/s
RAM Bandwidth Float Buffered aEMMX/aS:2617MB/s
WOW WHAT A DIFFERENCE THE GOLDEN SAMPLE MAKES!!!!!!!
First run with FSB and multiplier lower than usual I will beat that score no problem. Price was only $364.00 at New Egg ONLY $349.00 TODAY (http://www.newegg.com/app/ViewProduct.asp?submit=manufactory&catalog=48&manufactory=1387&DEPA=1) comes with a (3+1)-port IEEE1394 firewire card also.

[zergboy5]

These are my scores for my Radeon 8500 64Mb. My CPU is a 950 Duron.
The numbers along the bottem are the driver verions.

[J-Dog]

A7M266 (stock)
Athlon XP 1800+ (1533) (stock)
512MB PC2100 CAS 3
Leadtek Ti200 (stock)

Resolution 1024x768 32bit
Texture Format Compressed
FSAA Disabled
Z-Buffer Depth 32bit
Frame Buffer Double
Rendering Pipeline D3D Pure Hardware T&L

3dMark2001 6437

[JuNacy]

With my Duron setup:

AMD Duron 950Mhz
FIC AD11
256MB PC2100
Visiontek GF2 GTS-V
IBM Deskstar 60GB 7200rpm
(nothing overclocked)

3dmark2001(default): 3383
yeah baby!!! J/K :)

[Redhot]

Well I might just be a little paranoid but is a 3DMARK of "4244"
an accurate representation of a:::::::

Pentium4 1.5Ghz system with 256 PC-133 SDRAM and a v7700ti?

The only overclock is the FSB set at 105Mhz (420Mhz)
= P4 1.5 @1575Ghz

any others out there with a P4 and Sdram getting the same scores?

[stash]

I got 10150

Deafult setting 1024x768 32bit


Asus p4s333 flashed with p4s533 bios
p4 1.6a @ 2.133
256 ddr kingmax @ 333mhz
visiontek gf4 ti4400 290/640
win 2k


My ram is holding me back, I will be getting better and more ram next month, 512MB of Samsung 333 cas2 (overclocks better and i can use aggressive timings then!)

[Strat]

GF3Ti200 250/550





http://service.madonion.com/compare?2k1=3510998

[tking]

PIV-1.6
845WN intel MB
384MB of 133 SDRAM
Gforce 256, 32Mb graphics card
Name: NVIDIA GeForce DDR
Total Local Video Memory: 32 MB
Total Local Texture Memory: 64 MB
Total AGP Memory: 0 bytes
Display Driver: nv4_disp.dll
Display Driver Version: 6.13.10.2832
Driver WHQL Certified: Yes
Max Texture Width : 2048
Max Texture Height: 2048
Max User Clipping Planes: 0
Max Active Hardware Lights: 8
Max Texture Blending Stages: 8
Textures In Single Pass: 2
Vertex Shader Version: N/A
Pixel Shader Version: N/A
Max Vertex Blend Matrices: 0
Max Texture Coordinates: 8
Vendor ID: 0x10de
Device ID: 0x0101
Sub-System ID: 0x102e1102
Revision: 0x10

3DMARK = 2617

The video card is old? The stoopid Intel board can't be overclocked and only takes SDRAM? Where's the worst bottleneck in this? Any obvious tweaks I can do?

(it's my first crack at 3dmark & I'm 5x slower than equivalent?!?).


T

[gibsinep]

Video card is your biggest problem by far, then the speed of your RAM.

Tweaks- Update drivers, defrag, make sure you have no hardware errors in device manager.

[tking]

Thanks Gibsinep,

Believe it or not that was with a clean system.

I've sinced messed with the card a bit (found an ice overclocking program) and I've squeezed it up to 2970. She's running a bit hot, but no instability issues seem to show and the frame rates went up quite a bit.

I'm tempted to push this card hard. If it breaks I'll have to buy a new one;)

T

[namrak]

Yeah, you're right on the money that your memory is holding you back as well as your GeForce 256. Why is that you can't overclock the Intel board by pushing your fsb up? That's cool you can overclock your video card though. You might consider popping off the stock fan from your GeForce and using a better cooler like the Blue Orb. Also, consider putting on some RAM sinks for your memory. All of this will help cool your card if it seems to be running hot for you.

Take a look at Thermaltake's Blue Orb (http://www.thermaltake.com/products/chipset/crystalOrb.htm) and ram sinks (http://www.thermaltake.com/products/memory/hddr01.htm).

Heh. Try not to break your old video card since it would be nice to have a backup. Or for spare parts for when you begin upgrading your main rig.

[tking]

Thanks for the info. Good stuff. If I try and push the GF256 any higher I'll get some hardware for it.

Originally posted by namrak
Why is that you can't overclock the Intel board by pushing your fsb up?

It's an Intel 845WN mb. The bios is dumbed down (no access to fsb, voltage or anything interesting). Intel mentioned that there was a jumper to go into bios repair mode, but all this does is reset the bios password.

As near as I can tell, you can't overclock this intel board whatsoever?

I'd be exstatic if you told me otherwise....:rolleyes:

T

[namrak]

Can't help you there tking. I went digging around and it looks like the Intel motherboard you have doesn't allow for fsb overclocking. :(
The best thing that you can do in terms of adjusting your BIOS is to switch to a more aggressive memory timings (Cas2) and see if there's no problems. If you already haven't done so. However, all is not lost. There may still be hope for you. Take a look at CPUCool by Podien as this program might support your PLL IC. Read about it here (http://www.podien.de/FSB.HTM).

The only other thing left to improve your 3dMark scores is to get one of the latest video cards. 3dMark2001SE is heavily dependent on the video card and less on the processor.

[x-rewt]

My system:

Duron 1ghz
512mb apacer ddr cas2
ati 8500 64mb ddr
msi k7t-266pro2 mobo

score in 3d mark 2001: 6227

[tking]

Originally posted by namrak
... Take a look at CPUCool by Podien as this program might support your PLL IC.

Holy cow! That thing is awsome! I've just set two compaqs (the same ones I couldn't o'clock before) @112FSB from 100!

It's nice to support a one man concern like Podien. If anyone is interested in overclocking and they are at a dead end, visit the website, try it out ... and support the guy!

Click below to go see for yourself.

http://www.podien.onlinehome.de/default.htm

T

[namrak]

Originally posted by tking


Holy cow! That thing is awsome! I've just set two compaqs (the same ones I couldn't o'clock before) @112FSB from 100!

It's nice to support a one man concern like Podien. If anyone is interested in overclocking and they are at a dead end, visit the website, try it out ... and support the guy!
T

Heh! Glad to hear that CPUCool could help you out. I looked into it way back but the program still doesn't support the PLL IC for my old Dell Dimension. :( But at least Podien has another satisfied customer. tking, be sure to send him an email. He likes feedback especially when it comes along with money! ;) Heck, its only $13-$15 US so its worth it in exchange for squeezing out a little more performance.

[namrak]

Originally posted by x-rewt
My system:

Duron 1ghz
512mb apacer ddr cas2
ati 8500 64mb ddr
msi k7t-266pro2 mobo

score in 3d mark 2001: 6227

You're right in the "normal" range x-rewt. Have you tried ATI's new CATALYST drivers yet for your Radeon 8500? You can find them here (http://www.ati.com/support/driver.html). I just downloaded the drivers for my Radeon 7200 in a third pc.

Also, is your 3dMark2001 score on an overclocked Duron, overclocked Radeon? I hit 6553 with my Duron 1Ghz@1.24, oc'ed GeForce3 (235/530) and ASUS A7V133a mobo (8.5x multplier, 146 fsb). I suspect that I'd get scores in the 6200s though if I dropped everything to stock.

[mickey_hwoarang]

cpu: Intel Celeron 700 mhz (66 mhz FSB):D
cooling: stock
ram: 256 pc 100 sdram
video card: ONBOARD Intel 810E (8 mb video memory)
OS: Win XP Pro.
Direct X: 8.1

setttings: 1024x768x16bit
marks: 412!!!:p

I can't believe this system can run 3d mark 2001!!!!:eek:

[x-rewt]

Originally posted by namrak


Have you tried ATI's new CATALYST drivers yet for your Radeon 8500?

Also, is your 3dMark2001 score on an overclocked Duron, overclocked Radeon? I hit 6553 with my Duron 1Ghz@1.24, oc'ed GeForce3 (235/530) and ASUS A7V133a mobo (8.5x multplier, 146 fsb). I suspect that I'd get scores in the 6200s though if I dropped everything to stock.

They suck, i get about 100 lower with the latest drivers, nothing overclocked..if i rase my memory by 33mhz..the score is about 6400, I´m still whaiting for my cpu faan (delta 80mm 80cfm) and some artiv silver3 and a crystal orb.

[Lodzermensch]

Asus A7v 333
XP 1800+ (10x166MHz)
GF4 Ti 4400 default no oc
Corsair 512 pc2700ddr Cas2
Score 9908

[But_Why]

Ha!
this thing is still going! gotta post my new results then.

Athlon XP 1600+ (stock)
Gigabyte VTXE (Via kt266A)
512MB DDR266 RAM
Leadtek Geforce 4 Ti4400 128 (Stock/Stock)

8995 3dMarks!!!

3DMark2001SE
Have yet to update my Via 4in1's to the latest.

[WyreTheWolf]

3DMark2001se (http://service.madonion.com/compare?2k1=3729485)

Ran this on my Radeon 7500, and scored 6360...

I don't guess that is too bad... is it?

185 points increase w/ Catalyst drivers.

[Jawa]

Abit BH6
Celeron 300 o/c to 450MHz
320MB PC100/PC133 mix SDRAM
32MB Diamond Viper 2

Got a score of 480 or somewhere close to that.. ran it a few months ago.

Does 3dmark take your hard drive in account for the scores?

[Uberclocker]

3dMark 2001 (default res)

9509

[But_Why]

Originally posted by Uberclocker
3dMark 2001 (default res)

9509

Specs??

[gregorian]

My specs:

PII 338Mhz
192 SDRam
32MB Tnt2 M64 Nvidia


3Dmark2001 score ~385

i hate my com....

[tking]

P4-1.6 @ 1600mhz (stock)
384MB SDRAM
brand spanking new Radeon 8500 (stock)

3dmark= 6885


... had a GF2 before and couldn't break 3000 3dmarks no matter how hot (o'clocked) I got it.

The Radeon hit almost 7000 and that was with old drivers.

Catalysts go in tonight and over 7000 I go!

... and then the overclocking begins!

hahahahahaha!:D

T

[bw]

My system specification:
--AMD T-Bird 1.4@1.47gig
--DFI AD73 Pro mobo KT266A chipset
--Mushkins DDR 256 meg
--ATi Radeon 8500 LE gpu: 250; mem: 275, using ATi driver version: 4.13.9017. Later I'll use the "Catalyst."

And my 3DMark2001 score is 7826 3dmarks.

[a4mula]

p4 1.7ghz
512 RDRam 800
Geforce 3 64meg, O/C 240/510, det drivers 4.13.01.2980
Win ME

3dMark2001: 7140

http://service.madonion.com/compare?2k1=3900511

Didn't think it was too bad for a Geforce 3 running under ME, need to make that upgrade to XP..those guys were pulling 300 400 more points off the same setup.

[kvk007]

1800+ AthlonXP @ 1793 Mhz
ECS K7S5A SiS735 Mobo
1024 Mb DDR-2100
2 X 120 Gb WD w/ 8MB Cache
64 Mb GF3 Ti500
O/S: WinXP prof

3dMark2001: 8337

[tking]

Originally posted by tking
The Radeon hit almost 7000 and that was with old drivers.
Catalysts go in tonight and over 7000 I go!

... and a 175 increase with the new drivers brings me to 7060 3dmarks.

Now to start messing with the timing.

T

[Beeblequix]

<http://service.madonion.com/compare?2k1=3843362>

9578


Athlon XP 1700 +
A7V266-E optimal bios settings
MSI Geforce 4 ti 4200 64meg --this baby comes at faster default speeds than nvidia reference
256 ddr sdram 2-2-2-5
IBM 60GXP 40GB + POS 2GB c-g8 from the old packard hell
Lite On 12x10x32 cdrw
Tosiba 16/40 dvd/cdrom
yada yada yada...

My upgrade from G3ti200 to G4ti4200 resulted in an increase from ~7k to ~9.4k. The cost of doing this was ~$74USD, making this a pretty good price/performance deal.:)

ßeeßle Qµix

[michaelwest]

Compared to some of the people on the first page including the guy who started the thread my computer is way faster even with a low CPU.

It is
Celeron 300 MHz @ 374 MHz
176 MB Ram
Geforce 256 Video card

3dmark 2001 score (1155)

[But_Why]

that is a good score, is that at 1024x768x32 (standard settings)??

[michaelwest]

Yeah I have tried most resolutions and get around the same score each time.

The thing that is giving the good score (for an older computer) is the Geforce 256. This really is a good card for slower computers.

[Hammy1]

9774 with RADEON 8500 Retail,i should be happy.im not my radeon maxes out at 285/285 i know some go much higher.
and my Fsb is overclocked to 190x10,

[davidcarters33]

:cool:

Epox 8K3A (DDR333)
Athlon XP2000 (1.66 GHz)
256Mb Corsair XMS3000- DDR RAM (clock 175MHz = 350MHz)
PNY Verto Geforce 4 Ti4600 128Mb
Benchmarked on 1024x768 32 bit

3DMark2001 SE score = 11158
:D

beat that!
(without overclocking!)

[Martingi]

My specs:

Pentium 3 733@935 ( 5.5 x 170 FSB) :eek:
Asus TUSL2-C motherboard
leadtek Geforce 4 MX 400 64mb ddr ram (stock)
384 sdram (3 x 128)

3d mark 2001 (1024x768 32bit)
score= 4053

pretty happy with this score
:p

[tking]

Originally posted by Hammy1
9774 with RADEON 8500 Retail,i should be happy.im not my radeon maxes out at 285/285 i know some go much higher.
and my Fsb is overclocked to 190x10,

I just pegged my 8500 at 300/300 for a test and it worked fine (stable for many hours of constant running). Could it be a heat issue in your case?

I'm thinking I can run it up to maybe 325 before more exotic cooling will be required (but then I'm running a non-o/clocked P4, so heat is less of an issue).

T

[Hammy1]

Originally posted by tking


I just pegged my 8500 at 300/300 for a test and it worked fine (stable for many hours of constant running). Could it be a heat issue in your case?

I'm thinking I can run it up to maybe 325 before more exotic cooling will be required (but then I'm running a non-o/clocked P4, so heat is less of an issue).

T

I wish it was heat ive modded it,its just a sh*t card for O/C.

[Witch-Talon]

Score of 997 With a Geforce TNT2 M64 Athlon xp 1900+ 256 pc2100 RAM Nothing overclocked

TOALLY SUCKS!!!

Coughs coughs plans to upgrade soon anyway :)

[Beeblequix]

Originally posted by Witch-Talon
Score of 997 With a Geforce TNT2 M64 Athlon xp 1900+ 256 pc2100 RAM Nothing overclocked

TOALLY SUCKS!!!

Coughs coughs plans to upgrade soon anyway :)

Uhhh.....hate to break this to you but there's no such thing as a Geforce TNT2 M64. Did you mean to say Nvidia TNT2 M64? I think so. I must say that you get the Most Obvious Bottleneck Award. Congratz.

ß.Qµix

[NOHTO]

13000 WITH AMD
13165 3D MARK 2001SE (http://service.madonion.com/compare?2k1=3929871)

ABIT AT7 MOBO
UNLOCKED XP 2200 2109MHZ
8 MAXTOR 20 GIG HD'S IN STRIPING 0 WITH NEW HIGHPOINT CONTROLER
GAINWARD 4600 GOLDENSAMPLE WATERCOOLED 335/775
CORSAIR 3200 512 XMS RAM
NEW GOTT REFRIGERATED WATERCOOLER COOLANT TEMP 15 DEGREES F.
PONDMASTER 500 GPH WATERPUMP

Just v-modded board and now it is time to do the old Konformal coating on the mohterboard and the volt mod on the gainward and then maybe I'll be able to keep up with those [*-deleted word-*] pentiums
(thats what AMD gets for slacking for so long now they have to play catch-up all over)

(*** Polite language only please *** - WSUA (http://www.internet.com/corporate/legal.html) 3. a.)

[Grentarc]

thats not a bad overclock i might say.. 2.1GHz... 300MHz......

[Ammok]

Witch-talon, what youn doing witha tnt and a an Athlon 1900?

Take the vid card out and run 3d2001 again and you'll get a higher score.

C'mon, you really need to get an 8500 or G4 with that amount of power, sell the dog, wife children and get a decent card.

PS I think I might have a good deal on selling the missus and then i can get rid of my almost as bad G2mx400 with 3075 3d marks.:D

[Hammy1]

You can do this then.

http://homepage.ntlworld.com/david.hamilton37/my%20kitchen.jpg

[rzb932]

I had (sent Radeon back, its AA sucks)


XP 2000+
512 megs OC systems DDR 333
40 gig Western Digital 5400 rpm HDD
Radeon 8500 (HYBRID???) came 250/275 core/memory
Gigabyte GA-7VRX mobo

3D Mark 2k1 Default settings
8300


OC'ed Radeon 285/285 core/memory
8700

4x quality AA
3600 (sucks, looks bad too)

[Ralf]

3DMARK2001 SE score(default setting) : 4898

Overclock to 310Mhz, 480Mhz memory,score is about 5200.
Can't overclock to maximum 340Mhz, 500Mhz, the screen image flick.


P4 1.4Ghz
256 PC800 RDRAM(400Mhz)
20.0 Seagate GB
64MB DDR GF4 MX440

[Bizkitkid2001]

AMD Athlon T'Bird 1.2Ghz
Gainward GeForce 2 ti 450
256MB of PNY PC133 ram
40 WD 7200 RPM drive

Score: 4120

With the CPU OC to 1.350Ghz and vid card OC to 280/430

Score: 4478
:t

[racronus]

jeez is the longest thread on sysopt? I think I already posted my stats but the score was close to 8000. :)

[Hammy1]

Originally posted by racronus
jeez is the longest thread on sysopt? I think I already posted my stats but the score was close to 8000. :)

History in the making,it will be the longest eventually.of all forums aswell.

[Grentarc]

The longest Thread at sysopt i think is this one Clocking is good??? (http://www.sysopt.com/forum/showthread.php?threadid=45534&goto=newpost)



btw i benchmarked my Athlon XP 1700+
768MB PC133 SDRAM
40GB IBM 120GXP 7200rpm
60GB RAID 0 (20GB 5400rpm ATA 66 x3)
GeForce4 Ti 4200 128mb (Leadtek)

Got 7635 (3DMark 2001) out of it... where i get 9633 in 3DMark 2000 (All at default)

[mateo88]

My score = 2111:D

pIII 933 @ 1036
Asus TUSL2-C
256 pc133 at 148
Sis 315p-64 @ 167 mem/180 core
40gb 5400rpm maxtor hdd

I'm quite happy considering this card was advertised as scoring like 1931 with a Athlon 1.3 and 512mb of ddr.

[Tditty]

P4 1.7
256 PC 800 Rambus
40 Gig Barracudda
GeForce 2mx 400 :( Time for a new card

http://service.madonion.com/compare?2k1=4007636

My score 2641

[Qvark]

Soltek SL-DRV4
XP 1700
512 MB PC2100 Kingston
Creative GF3 TI 200 210/480

3Dmark 2001 default - 7378

[Benssax]

Pentium 3 1Ghz @ 1.1Ghz
256mb PC150
Visiontek Geforce2 Ti

3dmark2001se defualt setting: 4100
:)

pretty good for a geforce2

[rickdcableone]

this is mine http://service.madonion.com/compare?2k1=3590051 :t

[PimpG420]

ABIT-BH6
P3-450mhz @ 558mhz
pc133 620ram
GeForce2 200mx 32ram moded with odd way fan
@ 188cpu & 172mem

3DMark Score: 1346 :t

Well yea this one system Sux *** Maybe, but works well in all gamez and apps and Fast!

Is this a good mark?

[bushmaster]

MSI 6398e
P4 2.26
1024 mb 2100 ddr
gf4 Ti 4200
2x 40 gig maxtor hdd
turtle beach santa cruz

3D mark 2001 se 330 score was 10,575

P.S. no O/C'ng was involved

[Bizkitkid2001]

Man thats a first! I've never seen a 4200ti hit 10,000 without O/C!!:eek:

[spirit of adventure]

3DMark2001=10002 :)
3DMark2000=12400ish

[spirit of adventure]

[*-deleted word-*] Sig wasnt workin 1st time.....

System spec 4 above scores............

XP1800+
Soltek DRV4
256mb PC2100
Club-3D Geforce 4 Ti4200 128mb
40Gig W/Digi ATA100 7200rpm
SoundBlaster Live!
Lite-on 24x10x40x
Artec 16x DVD
17" Mon
Yamaha Dolby Digi Amp (10 speaker setup...mmm bass

(*** Polite language only please *** - WSUA (http://www.internet.com/corporate/legal.html) 3. a.)

[Bankarin]

Here's mine... 9204

What I want to know is how people are getting over 10000 with out O/C'ing. I had to put my Ti4200 @ Ti4600 specs to get this score. Here's a quick rundown of my system....

AthlonXP 1700+ (Palamino)
512MB DDR 2100
Visontek Xtascy Ti4200 SE 128MB
On-Board sound
BioStar M7VIB w/VIA KT266

I got 8277 before I overclocked the Card. Haven't O/C'd the system yet to try that one.....

[kloverboi]

my score was 10001!!!




SPEC:

p4 2.2
512 ddr ram
gf4 ti4600
120 wd hd
sound blaster augdigy card

[Animionic]

Mine: 4150 @ Defaults

My Specs:

AMD Athlon XP 1800+ @ 1.53 GHz

Asus A7S333 @ 266 MHz FSB

256 MB DDR PC2100 SDRAM @ 266 MHz

Asus V7700 Geforce 2 GTS Deluxe 32 MB DDR SDRAM Core @ 200 MHz, RAM @ 333 MHz w/ DetonatorXP 30.00

Maxtor DiamondMaxPlus D740X UDMA 100 7200 RPM 40 Gb Hard Drive

Cyberzone KC-300 300W Power Supply ATX

Thermaltake Dragon Orb 3 7000 RPM Copper-base HSF
5X 80 mm Sunon Case Fans
1X 3.8 Watt 80 mm Fan
1X Just Cooler Hard Drive Fan

KDS Visual Sensations VS-7i 17" Monitor @ 1152X864, 75 Hz

Windows XP Professional Build 2600

[Ralf]

that is a good score,

Did u know that:
My GF4MX440 score 4898 only at default setting, OC abit, the score hit 53xx only...

[spirit of adventure]

10120 now :D

[tricktx]

Just built my new system the other day so here goes.

ECS K7s5a Motherbaord
Athlon XP1800 @ 1.53 No/OC
256MB Pc133 Ram
Radeon 7500 64MB DDR
40GB Hard Disk

5003 @ 1024x768x32


Same As above
Radeon 7500 @ 300core/500mem

5465 @ 1024x768x32

[Tanelusa]

Hmm let me see Ive got:
Amd Athlon Thunderbird 1,4GHz
128MbRam
40Gb Seagate Barracuda ATA IV 7200rpm
GeForce2MX
Lovely PcChips M830LR MOBO
And da default score wuz:4439 hahahaa pretty [*-deleted word-*] good for my [*-deleted word-*] GF2!!Anyways Cheers from ESTONIA!!

(*** Polite language only please *** - WSUA (http://www.internet.com/corporate/legal.html) 3. a.)

[JuNacy]

I finally got around to benchmarking my main system:

P4 1.8A
Gigabyte GA-8SRX mobo
512MB RAM PC2700
GF3 Ti 200
WD 60GB HDD

6955 @ default (Nothing OC'd)

[bushmaster]

11172 still not o/c'd
3DMark Score 11172 3D marks

Game 1 Car Chase - Low Detail 163.5 FPS
Game 1 Car Chase - High Detail 53.5 FPS
Game 2 Dragothic - Low Detail 203.2 FPS
Game 2 Dragothic - High Detail 111.6 FPS
Game 3 Lobby - Low Detail 150.9 FPS
Game 3 Lobby - High Detail 65.8 FPS
Game 4 Nature 69.0 FPS

Fill Rate (Single-Texturing) 969.3 MTexels/s
Fill Rate (Multi-Texturing) 1953.8 MTexels/s

High Polygon Count (1 light) 46.1 MTriangels/s
High Polygon Count (8 lights) 10.6 MTriangels/s

Environment Bump Mapping 152.8 FPS
DOT3 Bump Mapping 226.5 FPS

Vertex Shader 88.8 FPS
Pixel Shader 148.8 FPS
Advanced Pixel Shader 103.6 FPS

Point Sprite 31.5 MSprites/s

[Nightblade]

System:
Athlon XP 1700
MSI KT3-Ultra ARU
512 MB of DDR 333
PNY GeForce 3 Ti 200
2 - WD 80 GB's HD's in RAID 1
1 - WD 20 GB HD
Lite On 48x12x48 CDRW
Pioneer DVD 16x
SB Audigy
XP Pro dual boot with Me


My first score in 2001 was 6612 @ 48 degrees C running @ (175/400)

after much tweaking and OC'ing (Video Card) I got it up to 7328 @ 51.1 C (210/475)

then I played with my memory setting, and I got a boost up tp 7468 @ 51.4 C (210/475)

Last score of 7604 was obtained by removing the memory heatsinks and reattaching them with Artic Alumina, and removal of the cheap PNY fan and installing a Crystal Orb with Artic Silver 3
This brought the Temp of the Video Card down to 47.8 C and allowed me to bump the speed to 215 / 490 (which I couldn't do before)

Not bad for a Ti200, I think

[SpaceBz]

Default 3DMark 2001SE Score:9087

-MSI KT3 ULTRA (Good to see another one out there, Nightblade:D )
-Athlon XP 2100+
-256MB PC2100
-Leadtek GeForce 4 Ti 4200

I'd love to overclock this sucker, but I got a cheap PSU so when I do she resets every stinkin time :r

[tricktx]

Tanelusa , thats a pretty dam good score for a geforce2MX. Could you post what FPS you were getting in the first 3 tests plz

[Ankerson]

P4 2.2@2694 Gforce 4 TI 4400 @ 300/650

http://service.madonion.com/compare?2k1=3665904

3DMark Score 12409 3D marks

Game 1 Car Chase - Low Detail 190.2 FPS
Game 1 Car Chase - High Detail 68.0 FPS
Game 2 Dragothic - Low Detail 206.6 FPS
Game 2 Dragothic - High Detail 119.8 FPS
Game 3 Lobby - Low Detail 175.5 FPS
Game 3 Lobby - High Detail 81.0 FPS
Game 4 Nature 65.6 FPS

[Chakane]

P4 o/C 2.4ghz
Morpheous GF3
1GB RDRAM
130 Gb HDD

8025...

Just have to O/C the video now and see how it all goes...:r

[grimfandango]

Originally posted by Tanelusa
Hmm let me see Ive got:
Amd Athlon Thunderbird 1,4GHz
128MbRam
40Gb Seagate Barracuda ATA IV 7200rpm
GeForce2MX
Lovely PcChips M830LR MOBO
And da default score wuz:4439 hahahaa pretty [*-deleted word-*] good for my [*-deleted word-*] GF2!!Anyways Cheers from ESTONIA!!

VEry nice score!!!

:eek:


How did you get such high scores? Is your card a Gf2 ti??

:eek:

all I get 1120 with my gf2mx200
:( :eek:

[Ralf]

Originally posted by Tanelusa
Hmm let me see Ive got:
Amd Athlon Thunderbird 1,4GHz
128MbRam
40Gb Seagate Barracuda ATA IV 7200rpm
GeForce2MX
Lovely PcChips M830LR MOBO
And da default score wuz:4439 hahahaa pretty [*-deleted word-*]n good for my [*-deleted word-*] GF2!!Anyways Cheers from ESTONIA!!

Tanelusa,
u r using GF2MX? how come get such a high score? GF2 Ti? u even beat the GF2 GTS / Pro..:eek: :eek: :eek:

[grimfandango]

Originally posted by Ralf


Tanelusa,
u r using GF2MX? how come get such a high score? GF2 Ti? u even beat the GF2 GTS / Pro..:eek: :eek: :eek:

yea I am sure hes got a Gf2ti!!

:rolleyes: :)

[Benssax]

Originally posted by Tanelusa
Hmm let me see Ive got:
Amd Athlon Thunderbird 1,4GHz
128MbRam
40Gb Seagate Barracuda ATA IV 7200rpm
GeForce2MX
Lovely PcChips M830LR MOBO
And da default score wuz:4439 hahahaa pretty [*-deleted word-*] good for my [*-deleted word-*] GF2!!Anyways Cheers from ESTONIA!!

I get a 3dmark2001se score of 4253 with my PIII 1.1ghz:) Mines a Geforce2Ti

[Ralf]

Wanna ask stupid question here:

Will adding more RAM will increase the 3DMARK score? From what i know , it would not. i have test using 128, 256, 512 RDRAM(i am using rdram now)..the 3dmark score doesn't make any difference..

[grimfandango]

Originally posted by Ralf
Wanna ask stupid question here:

Will adding more RAM will increase the 3DMARK score? From what i know , it would not. i have test using 128, 256, 512 RDRAM(i am using rdram now)..the 3dmark score doesn't make any difference..


yea that is right..!!

I tried the same thing and got same score all the time!
winth 128,256

:t

[GPo]

System
ECS K7S5A 3.1 now at 133/133
AMD 1900+ stock fan for now
Samsung 256 PC 2100
Radeon 8500 128
ATI TV tuner
Aopen burner & Creative DVD rom
SBlive value with FPS 2000 digital
Maxtor 40 GB ATA 133 7200
ADSL modem, using onboard lan
24" case with HD cooler fans 2 extra side case fans and an extra top exhaust fan.

Just finnished 2 runs of 3dmark 2001

First at 800 x 600 8000 marks
Second at 640 x 480 8784 marks

Also the sound and graphics on the demo are excellent

GPo

[gregorian]

PII 300MHz @ 338
192 SDRAM @ 75MHz
TNT2 32MB (Core and Mem at 125MHz)

1024x768x16bit
Window 98SE

score: a lousy 385 3DMarks

[Benssax]

My new score on My PIII 1.0Ghz@1.12GHz on 3dmark2001se IS:::

4340 on a Geforce2 Ti. :D :D :x

[Animionic]

How does a P3 1 GHz system get a higher benchmark than mine?

Mine: 4150 @ Defaults

My Specs:

AMD Athlon XP 1800+ @ 1.53 GHz

Asus A7S333 @ 266 MHz FSB

256 MB DDR PC2100 SDRAM @ 266 MHz

Asus V7700 Geforce 2 GTS Deluxe 32 MB DDR SDRAM Core @ 200 MHz, RAM @ 333 MHz w/ DetonatorXP 30.00

Maxtor DiamondMaxPlus D740X UDMA 100 7200 RPM 40 Gb Hard Drive

Cyberzone KC-300 300W Power Supply ATX

Thermaltake Dragon Orb 3 7000 RPM Copper-base HSF
5X 80 mm Sunon Case Fans
1X 3.8 Watt 80 mm Fan
1X Just Cooler Hard Drive Fan

KDS Visual Sensations VS-7i 17" Monitor @ 1152X864, 75 Hz

Windows XP Professional Build 2600

[Tditty]

Originally posted by Animionic
How does a P3 1 GHz system get a higher benchmark than mine?

Mine: 4150 @ Defaults




3dmark mesures video performance. Im sure you would beat them with PC mark which does CPU, HDD, and Mem

[Tditty]

Do not hit the send button twice :)

[OpK Chowdy]

Heh. Mine:

1.4Ghz Athlon T-Bird @ 1.53Ghz
Samsun PC2700 CAS 2
Soyo Dragon Lite Mobo
30GB 5400rpm Seagate HDD
52x "Generic" CD-ROM
Creative CDRW8432
MSI Geforce2MX400 64MB w/ TV Out (core @ 240Mhz)

3DMark2001SE: 3251 (default settings)

Detonator Beta 30.30 Drivers

---

PS: I have rigged a Duron stock heatsink and fan onto my geforce 2's core. :t

[Bizkitkid2001]

Originally posted by Animionic
How does a P3 1 GHz system get a higher benchmark than mine?

Mine: 4150 @ Defaults

His video card is faster than yours. He's got a TI and you got a GTS.;)

[fish_mun]

Epox 8KHA+
AthlonXP 1600 (1900 10.5*150)
512MB generic DDR (@2.8V)
Leadtek GF4 Ti 4200 (260 & 620) (The card with the huge hsf that covers both sides :rolleyes: )

Edit: Det 30 betas & XPpro

Default Settings (1024*768 etc)

3DMark2001: 10091

[The_Shafer]

I pulled a 2500 with the following specs.

A 950 MHz AMD Duron overclocked to 1.10 GHz.
A GeForce 2 MX 400 64 MB Video card
640 MB of SDRAM

I am running Windows XP, but i've been tweaking this stupid thing since the beginning and have been keeping it in good shape.

[Beeblequix]

10021

<http://service.madonion.com/compare?2k1=4074646>

Athlon 1700+
256 M DDRSDRAM (2-2-2-5, or 143Mhz)
Asus A7V266-E
MSI Geforce 4 ti 4200 64 Meg, memory at 594Mhz, core at 270

ßeeßle Qµix


ps: Y'all should put up your Madonion links so we can l00k at your scores thoroughly.

[Ralf]

3DMARK 2001 SE score : 5368

P4 1.4Ghz socket 423,
256 PC800 RDRAM,
20.0GB 5400 RPM SEAGATE HDD,
GF4 MX440 64MB DDR.

[Grentarc]

1662.. while waiting for new Geforce card (killed GF2ti. sent back under warranty.. might be able to get a Gf3 off suppliers if i chuck in a few extra $$$ to pay the difference)

Athlon Xp 1700+ @ 1900+
768mb SDRAm
GF2 MX 200 32mb :(
lotsa other cool stuff
Compare (http://service.madonion.com/compare?2k1=4084061)

[.yy.]

athlonxp 2200+(200x9)
epox 8k3a
kingmax 512M DDR 333 5ns
gainward gf4 Ti4200 64M gold DT (320/645)




3D mark 2001SEbuild330:12765

[beard]

i only got 8900 with 3Dmark2001 with

PIV2.0 @ 2.33
256MB Kingston RDRAM
Gainward GF4 Ti4200 64Mb @ default clock speed
ABIT TH7-II


Is there something wong here? infact, i noticed slower framerates in the "outside trees sceen" than on old PC (but faster in everything else).

Could it be to do with AGP BUS? it says mine is 66Mhz. does this mean that its only 2x instead of 4x? can i change my bus speed in the BIOS to 132Mhz and that be 4x?

[omega31]

4313

p3 750
asus p2b-f
320mb ram
gf3 ti 200
det 28.32

[omega31]

To beard: AGP runs at 66 mhz, at 1x, 2x, 4x, 8x (if you have suppot for that). The x rating refers to data transfers per clock cycle.

AGP 1x: 66MHz clock, Bandwidth: 266Mb/s
AGP 2x: 66MHz clock, Bandwidth: 533MB/s
AGP 4x: 66MHz clock, Bandwidth: 1066MB/s
AGP 8x: 66MHz clock, Bandwidth: 2.1GB/s

[Beeblequix]

Beard,

I suspect you're using a different detonator driver than me. 29.42 works very well, and I was getting ~9400 each time at default settings.

There are a few things to check.
1. See if you're using 'performance' or 'quality' settings. IMHO, your score reflects Quality settings, at least my scores were nearly the same in Quality mode.
2. Which driver version are you using?
3. tweak your bios if you haven't already.
4. don't load junk at startup if you REALLY don't have to.

Check these things. If you're willing to share your 3dmark score, please do. Just go back to your post and edit it by inserting the url.

ß.Qµix

[porchey]

I built a computer for my friend the other day and just had to run it
ecs k75sa
athlon 1800 xp
512 micron ddr
ati radeon 8500
tested on high setting and got 9987

now all i have to do is get some money and get me one:)

[spirit of adventure]

10160 (abit ago)
10202 now! wooohoooo :D

[spirit of adventure]

10719 now :x

[*-deleted word-*] how much more??? :eek:

"it canny take much more jim"

:r

(*** Polite language only please *** - WSUA (http://www.internet.com/corporate/legal.html) 3. a.)

[Ralf]

3DMARK 2001 SE score : 5368

P4 1.4Ghz socket 423,
256 PC800 RDRAM,
20.0GB 5400 RPM SEAGATE HDD,
GF4 MX440 64MB DDR.
OC to 355Mhz GPU, memory clock speed 485Mhz.


Can't able to touch 360Mhz GPU, computer freeze.:confused:

[spirit of adventure]

Woooohoooo 10816....com'on 11K :D

[The_Shafer]

I managed to pull a 2215. Here's my specs.

-AMD Duron 950 MHz overclocked to about 1.05 GHz.
-640 MB of SDRAM
-GeForce 2 MX 400
-Windows XP Pro

Not to bad for a slow crappy machine. :p

The_Shafer@hotmail.com

The_Shafer :D

[beard]

How can i find out if i have support for 4x APG and whether or not its working?

beeblquix i have detonator 6.13.10.3000, BIOS V. 4.25.00.30

Image quality was not on. its the default settings...

i have DX8.1 (4.08.01.0881) under win2k.

Something wierd is happening.

I ran my PIV2Ghz@2.33 alongside my PIII@900Mhz:

PIII with Inno3d Geforce 4 Ti 4200,

and the PIV with Gainward Geforce 4 Ti 4200

both systems have 256Mb RAM and same DX version.

anyway, i suppose this test was silly because the PIII has the default 28.90 drivers and 4.25.00.28 BIOS and the PIV has the 30.00's and ....30 BIOS but the PIV struggled in the Dragothic, Nature, and vertex/pixel/sprites/high polycount. everything else was about twice as fast as the PIII, but where it struggled was about half the speed of the PIII and very jerky.

overall scores were about 8900 for the PIV, and 7800 for the PIII.

surely there should be a bigger difference than this!!

I am quite impressed with the cheapest GF4Ti4200 i could find (the inno3d one! it comes with a sh*t game and some demos that dont work, but atleast they tried :) plus the box is nice)

i have just noticed this:

PIII says BUS MODE: AGP
PIV says BUS MODE: AGP (PCI MODE)

also dxdiag says my AGP texture acceleration can not be enabled on the PIV unlike on the PIII.


the PIV is win2k and the PIII is win98SE.

why are there so many stupid variables!

anyway what's all this mean and how might i improve things on the PIV? please? this is bugging me!

[Grentarc]

is the P4 a northwood or will. core??????

[pyxidium]

The Screenshots don't lie ... :)

http://members.cox.net/pyxidium_22/3dmark2k1.jpg


http://members.cox.net/pyxidium_22/3dmark2k.jpg


I'm still very happy with my 9 month old system :D

[Mr Miyagi]

OK

-Duron 1000
-PCChips 810LR POS mobo
-ATI Radeon 64 DDR VIVO
-512MB PNY PC133
-60GB Maxtor HDD
-Windows XP Pro

2797

Is it just me, butthis seems a little low...Even for a PCChips...Thoughts?

[Fishsauce]

3D Mark Score: 3195

Specs:
Athlon XP 1700+ 1.47 Ghz
Soyo KH7-DRAGON Plus
256 PC2100 DRR RAM
Geforce 2 Mx DH Pro 32MB
Creative SB Audigy X-Gamer
HP CD-Writer 9500 Series
Pine DVD-ROM Drive 16x DVD, 40x CD-ROM
Maxtor 7200 RPM 40GB
Quantum Fireball 30GB

[Bigjakkstaffa]

Hmmn, as ive not posted to this thread before:

System spec:

Abit KT7a RAID
1.33ghz Tbird
512mb PC133 SDRAM

Gf2 mx400 (old card):

About 2000-2300 with overclocking

Gf4 ti4200

7500 without overclocking 250/513

7900-8000 with overclocking 250/ 600

-yet to o/c the core...

--Jakk:t

[Lokopinoy]

9561@1024x768x32bit
10801@800x600x32bit
11573@640x480x32bit

No antialiasing, double frame buffer, no tweaks.

-Gigabyte 7VRXP

-Athlon 2200+

-MSI Geforce ti 4400

-512 pc2700 ddr

-Windows XP

I was hoping to break 10k and 1024x768. :mad:
Are these scores good for my system or bad?

[grimfandango]

Well here mine new scores..

win98se
p4 1.7
256mb sdram
gf2mx200
1367


win98se
XP 1600+
256mb sdram
gf2mx200
1336


are my scores Low??

:)

[Bigjakkstaffa]

are my scores Low??

how to break this tactfully to you....:confused:

YEAH !!

liek iv akready said to you, dump those 'orribe gf2 mx's and bump up to 512mb RAM... you should be flying then :)

--Jakk:t

[Beeblequix]

Originally posted by Lokopinoy
9561@1024x768x32bit
10801@800x600x32bit
11573@640x480x32bit

No antialiasing, double frame buffer, no tweaks.

-Gigabyte 7VRXP

-Athlon 2200+

-MSI Geforce ti 4400

-512 pc2700 ddr

-Windows XP

I was hoping to break 10k and 1024x768. :mad:
Are these scores good for my system or bad?

Locopinoy,
You could do better with some tweaks. Comparing to my own system, I'm attaining ~9400 in 2k1seBuild330(that's the lastest patch) without overclocking but using a few performance tweaks, and over 10k when overclocking using default 3dmark settings. Your 2200+ & 4400 should OWN my 1700+ & 4200, but you really don't.

for higher marks:
1) use performance settings instead of quality in your detonators
2) increase memory timings in the bios to CAS2 (the lower the better)
3) when I switched the cpu detect from AUTOMATIC to MANUAL in the bios, I instantly got a tiny boost in cpu spped (1466 TO 1479Mhz). I therize that because the Asus standard is to *slightly* overclock the FSB, releasing the cpu from being stuck at 1466 and allowing the muliplyer and fsb to combine to what it does gives a nice little tweak which is borderline fsb overclocking but not truly. Heck, I take what I can get. :)
4) setting your bios settings to OPTIMAL if you have the option will set things like memory interleave, fast writes, etc to a faster setting.

That's as much as I can say for now, 'cept that your system has the potential to get over 11k.

cheers,
ßeeßle Qµix

[Bigjakkstaffa]

Yeah, id say Beeblequix is right there, those scores do seem a lil low for your system. Try searching for BIOS and OS tweak guides, and if you wish you should be able to overclock the card by quite some margin, you should be able to get well over 11k id have thought, **** with a lil bit of tweaking and overclocking i managed to get my predominantly one year old system well over 9k...:D :r

Happy tweaking and post back your improved scores :)

--Jakk:t

[Lokopinoy]

Hey Beeblequix I ttried doing some of the things you said and now my system will not boot!!! Someone help me!

It says something like:
Boot Failure
Reboot and select proper boot device.

Someone help me!

Edit: Problem Solved.

[Mutant_Donkey]

2429.
Specifications:

Quadro 2 MXR
P3 1.2Ghz
384MB SDR
Abit VH6T

[Braiii]

Athlon XP 1800+ @ 12.0x148
ASUS A7V266-E
512 MB of DDR pc2100
Maxtor 20Gig 7200 RPM
VisionTek Ti 4600 128mb GeForce 4
Sony CPD-G420S Trinitron - Flat screen
SB Live! 5.1 Platinum w/JBL SCS150SI
Pioneer 16x Slot DVD
HSF Thermal Take Volcano 7+
Windows XP Professional


Click for my 3DMark2001se score - 11022 (http://service.madonion.com/compare?2k1=3192137)

[Tanelusa]

Originally posted by grimfandango


VEry nice score!!!

:eek: :eek:


How did you get such high scores? Is your card a Gf2 ti??

:eek:

all I get 1120 with my gf2mx200
:( :eek: :(

Hey I just boght my new GF3 Ti200 CREATIVE got a score 5773 is this good or should I try it again in winXP??My win98 bucks up!

[wend]

My score 8643 Score (http://service.madonion.com/compare?2k1=4045208)

[Eix666]

My machine...
Duron 1,2G@1404(156*9)
Chaintech 7VJDA (266A)
256mb PC-2100 DDR-SDRAM PQI cl2+turbo
60GB Maxtor D740x
ATI Radeon SDR 32mb(core&mem both 160@190)
winXP
and my score is 3684
pretty good for such a cheesy graphixcard i think....
and oh yea.... YEEEEHAAAA.... ESTONIA ruuuulz
:t

[Grentarc]

I got 7785 on :
Athlon XP 1900+ (1700+ w/ 12x multiplier)
768MB PC-133 SDRAM
Abit KT7A-RAID
Leadtek Geforce4 Ti4200 64mb @ 275/550
IBM 120GXP 40GB
60GB ATA66 5400 RAID 0 Array (3x 20GB)
SB Live!
2x 10/100 NICs

Compare (http://service.madonion.com/compare?2k1=4164749)

Anyone got any ideas on how to speed it up (without spending more money!:D)
Thanx

[Lokopinoy]

Originally posted by Bigjakkstaffa
Yeah, id say Beeblequix is right there, those scores do seem a lil low for your system. Try searching for BIOS and OS tweak guides, and if you wish you should be able to overclock the card by quite some margin, you should be able to get well over 11k id have thought, **** with a lil bit of tweaking and overclocking i managed to get my predominantly one year old system well over 9k...:D :r

Happy tweaking and post back your improved scores :)

--Jakk:t

New Score: 11053

Not well over 11k:mad:

[mraltoid19]

7590 pts. 3DMark 2001 SE build 330

AMD Athlon XP 2000+
Thermaltake Volcano 7
ECS K7S5A
512 MB PC2100 DDR-RAM
nVidia Geforce 3 @ Ti 500 Speeds
Creative Soundblaster Live! 5.1
Pioneer 16x Slot-loading DVD-Rom
TDK 16x10x40 CD-RW
Maxtor 60 gig HDD
Maxtor 8 gig HDD

All in this Tower
http://www.electroseller.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=electroseller&Product_Code=ATX288K-BK&Category_Code=9bay

[Bizkitkid2001]

Originally posted by Grentarc
I got 7785 on :
Athlon XP 1900+ (1700+ w/ 12x multiplier)
768MB PC-133 SDRAM
Abit KT7A-RAID
Leadtek Geforce4 Ti4200 64mb @ 275/550
IBM 120GXP 40GB
60GB ATA66 5400 RAID 0 Array (3x 20GB)
SB Live!
2x 10/100 NICs

Compare (http://service.madonion.com/compare?2k1=4164749)

Anyone got any ideas on how to speed it up (without spending more money!:D)
Thanx

Its your memory. You need some DDR too get near the 9000+ mark

[Grentarc]

yeah... i was thinking that was a problem... it doesnt matter too much to me, as it doesnt lag at all in games (at 1280x 1024) so i'm happy

[NJEnviroguy]

Spent the whole weekend getting my new comp all squared away (For now) and scored a 10152!
Asus P4S533
Intel P4 2.26 Ghz Northwood
Gainward G4 4200 w/ 128MB DDR
512MB Corsair XMS PC2700 DDR RAM
WD Spec Ed. 80Gig
Windoze eXPee

Now, I can't wait to start tweaking!

[1nteger]

Scored 10,375 at 1024X768 x32 with the machine I just built. Not done any tweaking at all - just put it together and ran 3DMark 2001.

Spec:
Asus A7V VIA 333 mobo
AMD XP2100+ CPU
Coolermaster Silent Super Heat Pipe HSF
512 Mb DDR Samsung RAM
Abit Siluro GeForce4 Ti4600
80Gb WD 'Caviar' SE HDD (with 8Mb cache)

After a bit of CPU and Graphics clocking, any guesses what i can expect?

[Lokopinoy]

Go for broke, but dont break anything. Shoot for 12Ks. I just got into this stuff when I got my new computer. Overclocking I was able to get:

11078 3dmarks with a GA-7VRXP, Athlon 2200+, 512MB 2700 DDR333 and a MSI ti4400.

I found that proper cooling makes a lot of difference (I first used 3dmark when a heat wave swept through Ca.) WIth a 4600 you can OC that card of yours to around 315/720 core/mem. I've given up goin for high 3d marks, I just want stability and crisp graphics. My computer runs all the programs I've tossed at it with no problem, so I feel over clocking is not necessary.

I've yet to try using 1t command rate because its unstable with my current bios version, mobo and memory setup and also the clock ratio which is on auto because I have to mess with dipswitches. Can anyone tell me how much of a differnce I might see if i fiddled with these two variables?

Edit: Whatabout adjusting AGP and DDR voltage?

[Grentarc]

I got higher with my cruddy PC133 SDRAM!!!!!!!!!!
i got 8768 (at standard) with the latest official Detonators (30.82 i think) with some DirectX tweaking using NVMax. [just realized thats over a 1000 point increase!!)

At 640x480 i got 9936, but they dont count

http://service.madonion.com/compare?2k1=4187893

[NOHTO]

Braiii, where u been? I kind of miss our heated battle we use to have going.


13000 WITH AMD
13165 3D MARK 2001SE (http://service.madonion.com/compare?2k1=3929871)

ABIT AT7 MOBO
UNLOCKED XP 2200 2109MHZ
8 MAXTOR 20 GIG HD'S IN STRIPING 0 WITH NEW HIGHPOINT CONTROLER
GAINWARD 4600 GOLDENSAMPLE WATERCOOLED 335/775
CORSAIR 3200 512 XMS RAM
NEW GOTT REFRIGERATED WATERCOOLER COOLANT TEMP 15 DEGREES F.
PONDMASTER 500 GPH WATERPUMP

[Grentarc]

OH MY GAWD!!!!!!!!!!!

[samdbugman]

ecs k7s5a mobo...amd 1600 xp...256 mb pc2100 ddr ram...maxtor 30 gb 7200 rpm hdd...msi g4 ti 4200 128 mb video card..windows xp home...1024x768x32........score....8872....... this is with nothing over clocked...... is this about as good as this rig will run with out over clocking the video card? thanks.

[BlackTruckRyder]

Epox 8K3A+ Latest bios and drivers
Athlon 1.33 @ 1.48
Radeon 7500 @ 315 & 250 Catylist 2.2
Windows Xp Home

3dmark 2001se : 5695
All settings on default:D

[saltydog1956]

P4 1.5
384RAM
Gainward NVidia GForce 4 Ti4200 overclocked
1024x768 32 bit

3D Mark 6645

[Grentarc]

saltydog1956: why is your score sooo low... a P4 cant be that horribly slow... what Dets you using??????

[Ralf]

Originally posted by saltydog1956
P4 1.5
384RAM
Gainward NVidia GForce 4 Ti4200 overclocked
1024x768 32 bit

3D Mark 6645

Ya, why the score so low? :confused: :eek:

[saltydog1956]

Good question, did not know that was low. Everything maxed on dets. All drivers updated.

[Bizkitkid2001]

actually that seems about right for that system.

If he is running sdram and a P4 willie then thats a good score.

[PDXracer]

My first post

I have just built myself my "dream" system, and am up and running.

My 3D Bench score was 8482

Here are my system specs ..

Kingwin PC Case w/ Acrylic sides and 5 case fans
P4 2.0Ghz 512c Northwood
Intel D845WNL Motherboard w/ 400FSB
Kingston PC133 SDRAM (2x 512m)
Maxtor 60gb 7200 HD (master1)
Yamaha 3200EZ CD/RW (slave1)
Maxtor 60gb 7200 HD (master2)
Fujitsu 10.4gb 5400 HD (slave2)
Maxtor IDE PCI Adapter ATA/133
Maxtor 45gb 7200 HD (master3)
Creative 16x DVD (slave3)
PNY GEF4 Nvidia 128m Video Card
Sound Blaster Audigy Gamer
Enermax 431w Power Supply
Linksys BEFRS41 Cable/DSL Router
RCA DCM245 Cable Modem
Sony 1.44 Floppy Drive
Logitech Keyboard
Logitech Mouse
HP 990cse Color Inkjet Printer
Logitech 5 piece Speaker w/ Sub
NEC 19" MultiSync 97F Monitor
Windows XP Pro
Norton Systemworks 2002 Pro
Zone Alarm Pro 3
Cable Modem service through ATTBI.com (1500d/256u)

[NOHTO]

Is that a 4600 vid card?

13000 WITH AMD
13165 3D MARK 2001SE (http://service.madonion.com/compare?2k1=3929871)

ABIT AT7 MOBO
UNLOCKED XP 2200 2109MHZ
8 MAXTOR 20 GIG HD'S IN STRIPING 0 WITH NEW HIGHPOINT CONTROLER
GAINWARD 4600 GOLDENSAMPLE WATERCOOLED 335/775
CORSAIR 3200 512 XMS RAM
NEW GOTT REFRIGERATED WATERCOOLER COOLANT TEMP 15 DEGREES F.
PONDMASTER 500 GPH WATERPUMP

[dazsears]

Two scores, two machines!
first 1.3 celeron on ABIT ST6R
512 PC 100
striped 2x10gig fujitsus 7200rpm
4200ti @ 300/600 2001se 6692

second place PIII 1ghz on ABIT VH6T
512 PC133
20 gig Maxtor 5400rpm
Ge 3 ti200 @230/480 5558 :)

also tested 3Dmark 2000 but second machine kicked *** with 6982 beating 6681 :eek: does this mean that Geforce 3 is better with DirectX 7 than the Geforce 4 ???????????:confused:

[Bigjakkstaffa]

Perhaps - but the question is who's gonna pay for an item because it performs faster in old / nigh on obsolete API's better...

--Jakk:t

[Grentarc]

My GF4 Ti4200 got well over 10,000 3DMark 2000 points.. but that is with an AMD system... hmmm....
also, put the GF4 into the P3 system and benchmark it.. you may get better results still!

[Grentarc]

PDXracer - your score seems to be lower than mine, and i thought that a P4 2.0 GHz would out do me even... (Athlon XP 1700+ @ 1900+) but then i guess your SDRAm will be holding you back. Tweak your DirectX settings a little, and tighten you memory settings. Also, clock the Geforce4 up a little, I can get my Leadtek Geforce4 Ti 4200 64mb to 310MHz core and 570MHz RAM so far (I am still going up, but i test for a number of days for stability issues.. also am gonna replace theal paste on card with Arctic Silver 3 :x :D) I would like to see that an expensive system like that do atlest 9000 3DMarks... as i think with a little tweaking you can get another 600 points or so..

[Tanelusa]

Pleeez can some one help!!!I think this is a bit low score for my speck!!!

AMD XP 1700+
128SDRAM (yes SDRAM:D )
HDD 7200rpm seagate
3D Blaster GeForce3Ti200 CREATIVE!!!!
and win98!!XP had da same results!!

3DMark2001 default score:5784!!!!!

Help meeeee!!How much could I overclock 400Mhz;175!!
Da cooler is over da memory slots too!!

GTA3 runs @ 1024 32bit all high no prob!!

Oh yeah and with what do I overclock??Recommend some proges!!

[Bigjakkstaffa]

go over to www.guru3d.com they shall have all the tweakign and overclockign tools you'll need, Rivatuner is pretty popular amongst the masses for general nvidia tweaking and o/c'ing :)

--Jakk:t

[Tanelusa]

Originally posted by Bigjakkstaffa
go over to www.guru3d.com they shall have all the tweakign and overclockign tools you'll need, Rivatuner is pretty popular amongst the masses for general nvidia tweaking and o/c'ing :)

--Jakk:t

I can't use that cuz I have a CREATIVE card!!!
Riva tuner uses DETONATOR drivers!!!

[Hammy1]

Originally posted by Tanelusa
Pleeez can some one help!!!I think this is a bit low score for my speck!!!

AMD XP 1700+
128SDRAM (yes SDRAM:D )
HDD 7200rpm seagate
3D Blaster GeForce3Ti200 CREATIVE!!!!
and win98!!XP had da same results!!

3DMark2001 default score:5784!!!!!

Help meeeee!!How much could I overclock 400Mhz;175!!
Da cooler is over da memory slots too!!

GTA3 runs @ 1024 32bit all high no prob!!

Oh yeah and with what do I overclock??Recommend some proges!!
http://www.entechtaiwan.com/ps.htm

It does all G/Cards.

[Bigjakkstaffa]

Oh dear - newbie alert.... as you have an Nvidia card you which use DETONATOR drivers, you should be able to use rivatuner with your drivers supplied with the card (which will be waaay outta date by now) anyways... if not get the detonator drivers from www.nvidia.com and install those then use em. Any Nvidia card can be optimised via Rvatuner - you have an Nvidia Card made under liscence by Creative, it will run dets and is the same (more or less) as all other nvidia cards of that type...

--Jakk:t

[Tanelusa]

Originally posted by Bigjakkstaffa
Oh dear - newbie alert.... as you have an Nvidia card you which use DETONATOR drivers, you should be able to use rivatuner with your drivers supplied with the card (which will be waaay outta date by now) anyways... if not get the detonator drivers from www.nvidia.com and install those then use em. Any Nvidia card can be optimised via Rvatuner - you have an Nvidia Card made under liscence by Creative, it will run dets and is the same (more or less) as all other nvidia cards of that type...

--Jakk:t


THANK U!!I'll try now!!And I opend the overclock under the detonator drivers!!So it's now possible to overclock but I don't know how much is OK??

[Bigjakkstaffa]

Go up in 5mhz increments and run a test, run 3d mark - play a 5 min quake 3 game etc, then come out and bump up another 5mhz and so on and so on - repeat until you start to notice graphical errors etc then drop back say 10Mhz :)

Do this for both RAM and Core (although i wouldnt reccomend pushing core too hard as its the most liable to pack in)... tell us how you get on and dont forget to post your new benches :)

--Jakk:t

[Tanelusa]

Originally posted by Bigjakkstaffa
Go up in 5mhz increments and run a test, run 3d mark - play a 5 min quake 3 game etc, then come out and bump up another 5mhz and so on and so on - repeat until you start to notice graphical errors etc then drop back say 10Mhz :)

Do this for both RAM and Core (although i wouldnt reccomend pushing core too hard as its the most liable to pack in)... tell us how you get on and dont forget to post your new benches :)

--Jakk:t

1QUESTION!!!

whats really:
CORE:
and
MEMORY:

What effect's speed the most??

[Bigjakkstaffa]

Both affect spped - although you'd prolly be best off just fiddling the memory speed as it is difficult to cause damage by o/c'ing memory and you only see marginal gains by o/c'ing core unless you do so by say 50mhz. I increased my gf4 ti4200 ram from 513mhz to 600 which pushed me from about 8500 3d marks to 9000 ish, although i wouldnt really reccomend you push by 100mhz.

What id say is o/c the RAM first, until you get graphical errors etc, like i mentioned in the previous post, then drop back the 10mhz, then o/c the core by no more than say 25mhz if you want to be safe, you should see a few 100 marks in 3dmark 2001 by doing that :)

--Jakk:t

[Tanelusa]

BUT IS THERE A PROGRAM THAT MEASURES MY VIDEO TEMPERATURE????AND HOW MUCH IS OK TEMP!!

Oh and I OC my card and things were a bit faster!!

Memory now@420!!

[Mr Miyagi]

UPDATE
New system (Sort of)

-ECS K7S5A rev. 3.1
-AMD Duron 1000 @ 1240MHz 1.85v
-512MB PNY PC133
-Gigabyte Radeon 8500LE @ 275/275 (8500 clock)
-Maxtor 60GB 7200rpm UATA/133 HDD
-DVD Drive
-24x10x40 CDRW

1024x768x32 ---> 6462

http://www.kalistoanime.com/images/benches/3dm_1240_275_1024.jpg

[Bigjakkstaffa]

The only way im aware of to monitor your gfx card temps is to get some form of thermostat and place it on the card while running and take your readings manually. Heat wise you cant really kill a card, as once you reach the graphical artifacts etc you know your coming up high heat levels, so you just drop it back and you should be okay....

--Jakk:t

[Bigjakkstaffa]

Ive o'ced at least 3 of my own gfx and never had any temp readouts - as short of using manual temp reading kit you cant, really ITS NOT A BIG ISSUE -- LET IT GO, your card willl let you knwo when youve reached your limit via graphics tearing etc, just drop back down a few mhz into a comfort zone

--Jakk:t

[Ammok]

or stick a fan on it if your paranoid.:)

[Bigjakkstaffa]

True - although i never had any problems with just stock cooling ... (although i did once strap an old 498 heatsink onto the rear of a voodoo 3 ;r)

--Jakk:t

[Tanelusa]

I's there any way I could see fps in GTA3???

Cuz thats the game I play from time to time!!And I't uses quite HEAVY MOTOR!!

[Bigjakkstaffa]

Start a new thread for that... this aint really the place

--Jakk:t

[Grentarc]

Originally posted by Bizkitkid2001


Its your memory. You need some DDR too get near the 9000+ mark

I got 9388!!!!!!!!!!!!! w00t!!!!!!!!!!

on XP 1700@ 1900+
768MB SDRAM
64mb Geforce4 Ti4200 @ 310/570
Have a look <-HERE!-> (http://service.madonion.com/compare?2k1=4387593)

[Hammy1]

But thats [*-deleted word-*] for my pc so im working on it.

(*** Polite language only please *** - WSUA (http://www.internet.com/corporate/legal.html) 3. a.)

[Grentarc]

wot?:confused:

[Hammy1]

KX7
XP2200+
CORSAIR XMS 3200
ASUS V8 G4 TI 4600
WATER COOLED.CHILLED.

[Tanelusa]

Ok my final score is http://service.madonion.com/compare?2k1=4392945

I used just some programs!!

OC 175@220 400@500
Pure air cooling!
Quite satisfied!!:)
I now know that I can't get any better score than that!

AGP 4x
AGPFastwrites OFF
miniport_533 drivers
Detonator40.41
Oh yeah AGP aparture size is 64!

My best score was 6700something!! with default
With everything set low I got 7500something!

[Logan[TeamX]]

I got just over 4000 with a completely stock setup: AMD XP 1800+, ECS K7S5A mobo, 256MB DDR-2100, GeForce 2 Ti 64MB DDR.

Now, when I O/C the 1800 to 2100-levels, I get just over 5000 at stock 3DMark2001SE settings and stock video card settings.

When I take RivaTuner to the GeForce 2, and although the Pine Ge2 runs at 225 core when the book clearly states a 250MHz GPU, and set it to 250/450, I get an increase to about 5200 3DMarks. Taking the card to 265/475 gets me to 5359, and after that I start getting artifacts in my games.

For now the card is back to stock, and because of weird boot issues the XP 1800 is only turned up to 1900 levels. Haven't 3DMarked it yet, but I expect 46-4800 or so.

Logan[TeamX]

[michaelwest]

Now with my upgraded system I get 2643 3DMark 2001 points

900 MHz Duron @ 1008 MHz
256 SDRAM
Geforce 256 @ 150/190

[SLaSheR1976]

hey all:t i have come here and red these forums many times, finally signed up....hehe, my system is as follow.....

xp 1800 @ 1726mhz(xp2100)
soltek sl75drv5 motherboard
512 pc2700 ram, 333mhz
thermaltake volcano 7+ hsf
x micro geforce 4 ti 4200 128 meg at 270/520
audiogy
seagate baracuda 7200 rpm 60 gig
and all the usual other stuff..hehe

3dmark2001 default, full run = 10656
anyone that has a geforce 4 card, there is drivers available specifically for the geforce 4 cards only, the nvidia 40:41 drivers, apparently they mess with other cards though:mad:
i hope this link works......http://service.madonion.com/servlet/Index?pageid=/orb/projectdetails&projectType=6&projectId=4388112

[Ammok]

Welcome slasher, nice score and nice system.:D

[SLaSheR1976]

thank you very much. i had planned this system for a long time, money finally came in, so raced off to the shop to get my goodies:D I have 2 fans mounted on side cover, one blowing straight over gpu and ram sinks of video card, other in allignment with cpu fan, i still have to install my extraction fan in roof of case and work something out like a pipe from sidecover fan to the cpu fan, direct it all in there:)

[Ammok]

Slasher

There are some good threads on cooling in here, just a matter of searching for them, everything from peltier and water to liquid nitrogen, mostly in the overclocking forum, or start your own.:)

[SLaSheR1976]

thank you, just looking now.hehe:) I would love to go to water cooling for the peace and quiet....lol, but i need to find a good compete water cooling setup that is going to give me nice cool temps, at current my cpu during gaming etc runs about 20 degrees celsius above room temp, i have the volcano 7+ set at medium (switch i mounted on back of case that comes with it) but i want my peace and quiet, and not have to pay more than my car is worth to get it...lol

[SLaSheR1976]

i think this link might work.....lol http://service.madonion.com/compare?2k1=4388112

[grimfandango]

Originally posted by SLaSheR1976
i think this link might work.....lol http://service.madonion.com/compare?2k1=4388112

:eek:

3DMark Score 10656 3D marks !


very nice!

a gf4ti4200 geting this high scores!

:t

[SLaSheR1976]

hehe, thank you, i also only run full benchmark and all at default too, to get a true reading:D video card is running at 270 core and 500 on the memory

[Ammok]

My poxy G2mx400 mannaged a paltry 3080 so looks absolutely pitiful angainst yours, Slasher.

Anyroad, I got to tell you all this, might help some poor beggar and if not should show up my ignorance delightfully.

Today is the first dat in four months that I have managed to run 3d2001. I installed XP and have not been able to run abenchmark since, I usually manage to get the two car section and then oops, max crappout. But then, God bless himBIPOLARBILL mentioned on another thread he would only confidently recommend 23.11 drivers for XP because he knew for sure that they worked well. So today, after a mega uninstall of everything NV, I put 23.11 back on again. And i can now state that I have a 3d mark score of

3080 I say again 3080

Oh God, you don't know what this means to me, I've underclocked, took all my mem sticks out, stuck more fans in the case than you get at an Arsenal match, raised the voltage to brown out levels and even contacted tech support at MadOnion, who did reply but couldn't help specificly. Am I enjoying posting this or what!




THANK YOU BBP

[SLaSheR1976]

congratulations, nothing worse than a comp that wont benchmark:( that is a very good score i think for that card, i had a duron 800 with roughly same card, i was getting only 2400, but a friend has that same card with faster processor, and he is not getting much more than i did.....:( i red here about should only benchmark it after reboot, so i did that, and turned zonealarm off and got nearly another 100 points more:D I have a question though.......do most people run their benchmarks at settings they dont run their comp at all day, like i hear of guys cranking video card right up, artifacts galore and all that, just to get the big scores....lol, or turning res down and only running the games only etc. me personally, i think the benchmark should be run at default settings, full test and at what you actually use the comp at all day, just my opinion, not that anyone really cares.....lmao http://service.madonion.com/compare?2k1=4425502

[Ammok]

I think this is how you do it,

http://service.madonion.com/servlet/Index?pageid=/orb/projectdetails&projectType=6&projectId=4424647

score dropped a little second time around but I'm off to change the processor fsb.

I agree defualt scores are the only one that matter.

[handman]

My score on 3dmark2001 SE was 12240

my sys specs are as follows

P4 2.4 (533 FSB9)
512 megs of 32-bit rambus
GeForce 4 TI 2600
Soundblaster Audigy

Handman

[nramsey]

Just got my new system runnin...pretty happy with it so far :)

3DMark Score 10351 3D marks

http://service.madonion.com/compare?2k1=4455062

System is:
Windows XP
Athlon XP 2000+ (stock speed)
Gigabyte 7VRXP mb
TT Volcano 9 running at 2500 RPM (quiet :) ~40C idle, 45-47C under load)
512 mb PC2100 DDR RAM
Gainward Geforce 4 Ti 4200 64mb Golden Sample (running stock "performance" clock levels (think it's like 270/550)
ATA66 40gb 7200 RPM Maxtor HDD


The 3DMark score with above system, but with ATI Radeon 7500 was around 5500 3D marks.

[dazsears]

I overclocked my 1.3 celeron to 1.5 and pushed my abit 4200ti up to 300/600 and got a quite reasonable 8196 not bad for a cheapish set up. Also using ibm 7200rpm 60gig hdd with audigy sound on a abit St6r mobo. want to push it higher but 115fsb seem the limit. Is it worth fitting heatsinks to vid card memory?:)

[nramsey]

Originally posted by dazsears
Is it worth fitting heatsinks to vid card memory?:)

Couldn't hurt. My Gainward Ti 4200 "Golden Sample" came with heatsinks on front and back of the card on all the memory. It comes default clocked in the 270/550 range IIRC with many folks saying they have taken it to the 320/600+ range. That said, they only gained a hundered or so 3D marks, which probably wouldn't be noticable in gaming. If you're going for "brag factor" then do it, if not, maybe not needed.

[michaelwest]

My latest stas look like this.

AMD Duron 1.2GHz @ 1452 MHz
256 SDRAM
Geforce 256 @ 150/200

3DMark2001 points 3028.

[SLaSheR1976]

my latest 3dmark2001se score....http://service.madonion.com/compare?2k1=4457035
my system is running at this 24/7, it is suma se ti4200 128meg (on same design board as ti4600) is xp 1800 overclocked on fsb only

[Twiggy Stixx]

With my C433 @ 540Mhz i got 3478 with my GF3 Ti 200 @ 220/450.
With my P4 1.5 @ 1.7Ghz with that same card at the same clock i got 4555. I was expecting more of an impovement with the faster CPU, it this a crappy score?

BTW. The Celeron has 128mb RAM on a Space Walker MV17E and the P4 has 256mb SDRAM on an Asus P4B-M Thanks :D

[Tanelusa]

Thats kinda really low score for a P1,5:eek: :eek: :eek:
I have a AMDXP 1700(1460Mhz)
196SDRAM
GeForce3Ti200 400@500 175@220
Score:6600 something!!

http://service.madonion.com/compare?2k1=4527111

[Twiggy Stixx]

Its actually overclocked to 1710MHz but i still think its low. Athlons are alot faster than equvilantly clocked P4s and of course score alot better still i was expecting someting in the mid 5000's. Another thing, do you know what kind of a difference FastWrites would make on performance? In "chipset info" in WCPUID it detects my card as the VGA device but in the menu where it shows what features are enabled all those options are greyed out. In the C433 this did not happen, is this a problem and if so how can i fix it? BTW. I am running nVidia 30.82 drivers (happened with 29.42 aswell). One more thing, i know athlons support 3DNow! What is it? :confused:

http://service.madonion.com/compare?2k1=4528753

[Ammok]

Twiggy

3d now is their own instruction set for the processor.

Your score is rather low, I have a g2mx400 that hits 3000 with no overclocking on a 1.4ghz athlon. Need to do some tweaking.:D

[Twiggy Stixx]

I noticed something today that might be the problem. On the GF3 Ti 200 tab in advanced under settings it says bus type: AGP (PCI mode). Is this why its so slow? Do i need to change some settings somewhere or install some drivers or something? I read something about a guy having to install VIA 4in1 drivers and updating the PCI-to-PCI bridge drivers to fix it. :confused: My board is an i845 though. He had a VIA chipset with an Athlon 1Ghz and went from 4700 to 6200 3D Marks after installing the drivers.
Ill have a look around.

Twiggy Stixx - aka. Bustacapinyoass

[Twiggy Stixx]

BTW that guy was running a 128mb GF4 Ti 4200

Before: http://service.madonion.com/compare?2k1=3720553

After: http://service.madonion.com/compare?2k1=3764133

[Twiggy Stixx]

SWEEET!
I re/installed the PCI bridge drivers and it works sweet!!! Thats all the problem was. I ran 3D Mark with everything stock and i got 5415 3D Marks and with CPU and GPU overclocked and i got 6318 3D Marks :D Where i got 35 FPS in RTCW on max quality i now get 80!!! If only i had of known sooner. Hey, arnt we all here to learn? :)

My Results! (http://service.madonion.com/compare?2k1=4541280)

[Ammok]

That is sweet, twiggy, and thats the power of the forums, you could have gone on thiniing everything was fine, but now you got your cake and eaten it. Well done.:t

[NOHTO]

14183 3D MARKS

MAD ONION (http://service.madonion.com/compare?2k1=4545144)
ABIT KX7- 333R
XP2200
CORSAIR 3200 XMS RAM
2 40 GIG IBM HD IN RAID 0
RADEON 9700 PRO
1ST RUN ALL AIR COOLED

[NOHTO]

15775 3DMARKS 2ND RUN MAD ONION (http://service.madonion.com/compare?2k1=4545608)
ABIT KX7- 333R
XP2200
CORSAIR 3200 XMS RAM
2 40 GIG IBM HD IN RAID 0
RADEON 9700 PRO
2ND RUN AIR COOLED

[sycnum]

Specs:

P3 500 oc to 560
128Mb Pc133 kingston SDRAM
WIN98 OS
Elsa Gladiac 511 GeForce 2 MX 400 64 MB SDRAM (overclocked)

3D MArk (default setting) = 3360

[Tanelusa]

JACKPOT ALLMOST@LAST!!!!!:r :r :D :D
I managed to get out of 196MbSDRAM this

http://service.madonion.com/compare?2k1=4564404


WOHOOOO,now a bit more and Im gettin 7k:D :r

And that clock doesent affect anything!!Runs great and no bugs or whatsoever!!
Who told me to spank clock only by some 4-5mhz:p
Man I pushed 120Mhz just fine!!
When my clock is 550 then it gets a bit weird!!

[Tanelusa]

JACKPOT ALLMOST@LAST!!!!!:r :r :D :D
I managed to get out of 196MbSDRAM this

http://service.madonion.com/compare?2k1=4564404


WOHOOOO,now a bit more and Im gettin 7k :r

And that clock doesent affect anything!!Runs great and no bugs or whatsoever!!
Who told me to spank clock only by some 4-5mhz:p
Man I pushed 120Mhz just fine!!
When my clock is 550 then it gets a bit weird!!
Oh yeah,THERE ARE NO LODBIAS+3 or anything else that would get the score up to this!!

Hehee and I tested my friends compu too:eek: :r
It was sooooo fast maaaaan:eek:
He scored AWESOME:216
He had AMDDuron850Mhz and a SIS INTREGATED CARD 64mb:r

[StealthNet]

6812 3DMark2001.

Athlon XP 2100+ o/c to 140 FSB
MSI GeForce 4 MX440 @ 340/520 MHz.

Config:

http://www.rmc.eti.br/pc.htm

Madonion:

http://service.madonion.com/compare?2k1=4563435

[Tanelusa]

Yeah well I got my 7k!!!:D

http://service.madonion.com/compare?2k1=4574210

[more]

7141 here.
P4 2.53G o/c to2.86G
512MB PC2100 Crucial 2.5CAS
BD7II/BIOS AJ
Visiontek Nvidia MMX440 o/c
340/500

BTW, 6169 MIPS Sisoft Sandra 2002
Standard (Unicode)

[Bizkitkid2001]

Originally posted by Tanelusa
Yeah well I got my 7k!!!:D

http://service.madonion.com/compare?2k1=4574210


Good job!:t

[StealthNet]

Weird. Installed the detonators 40.71 and my 3DMark2001 dropped from 6812 to 6050.

???

[booter]

3dmark2001se 1024x768 32bit. My score = 90203 :)

Edit: Detonator 40.52

P4 2.26
P4S533 (SiS645DX)
Asus Gefore3-Ti200 @ 220/535
256MB Samsung original DDR400

Not a bad score for a Gefore3ti200 card and 256mb ram.

[Ammok]

you mean 9203 of course......otherwise you got a pretty good card there....:D

[Bigjakkstaffa]

LOL - either that or some really scary overclocking :D

--Jakk:t

[Grentarc]

nahh.. he must have mistaken the score his other machine (athlon XP it had to be of course :p :D) got.. coz a P4 cant get THAT high :r :r