Richard_Cranium72
09-01-2000, 02:50 PM
I found some SHOCK TESTt figures in G's.->>
IBM->>
Shock (half sine wave)
225 G(5,4 disk/7200 RPM)
350 G(3,2,1 disk/7200)
400 G(2,1 disk/5400) <<<--MAN!, 400 G's !!!
http://www.storage.ibm.com/hardsoft/diskdrdl/prod/ds75gxp40gv.htm
Trivia, just FYI
AND
Setting up HD's
"If your BIOS does not utilize Auto-Detect, Maxtor recommends that you:
Manually enter the Maximum Cylinder value for the hard drive if greater than 8.4 GB.
Manually enter the Actual Cylinder value for the hard drive if less than 8.4 GB.
NOTE:
NEVER enter more than 16,383 cylinders in the system BIOS. This may potentially cause DATA LOSS!! http://www.maxtor.com/Maxtorhome.htm
DrVette
[This message has been edited by Richard_Cranium72 (edited 09-23-2000).]
IBM->>
Shock (half sine wave)
225 G(5,4 disk/7200 RPM)
350 G(3,2,1 disk/7200)
400 G(2,1 disk/5400) <<<--MAN!, 400 G's !!!
http://www.storage.ibm.com/hardsoft/diskdrdl/prod/ds75gxp40gv.htm
Trivia, just FYI
AND
Setting up HD's
"If your BIOS does not utilize Auto-Detect, Maxtor recommends that you:
Manually enter the Maximum Cylinder value for the hard drive if greater than 8.4 GB.
Manually enter the Actual Cylinder value for the hard drive if less than 8.4 GB.
NOTE:
NEVER enter more than 16,383 cylinders in the system BIOS. This may potentially cause DATA LOSS!! http://www.maxtor.com/Maxtorhome.htm
DrVette
[This message has been edited by Richard_Cranium72 (edited 09-23-2000).]