CPU bench: MIPS3

[10.90streetcar]

I got 1126/52.4

[Potlicker]

I got 1682mips 82mflops

[Gaston]

Hi,
at http://www.volny.cz/v.reif/MIPS3.zip
is win/dos bench.

Please report your CPU and from screen
values Mflops and MIPS

Time take about 5 seconds

(best processor today has 1200 MIPS and 60 Mflops)

[Gaston]

And whats your CPUs?

Is it Athlons at 1333MHz?

I need type of your CPUs with benchmarks

[eagle1]

Whoa,.!!

With my super system:

AMD k6-2 500mhz
PCChips 598LMR mobo
128 PC133 Ram
etc etc.

I get:

MIPS: 337
MFLOPS: 12.6

http://www.sysopt.com/forum/smile.gif http://www.sysopt.com/forum/wink.gif

[Gaston]

K6-2-500? and only!! 12 Mflops?

yeeh, PC-Chips - Pc- *deleted*

I have AMD K6-2 266Mhz
and ASUS Sp97V board

my values is 250 MIPS
and 14.8 MFlops

PS: high Mflops is for 3D very important!

Please refrain from using that type of language in these forums! - Fingers FAQ (http://www.sysopt.com/forum/faq/faq4.html)

[This message has been edited by Fingers (edited 09-02-2001).]

[eagle1]

Yeah I know.!! PCChips sucks all the way.!
But it has work for me and it stills keep kicking!

I was running a bunch of apps when I tested it so.. maybe it can do more.!

I'll keep you posted.!

[eagle1]

Yep.. I ran the benchmark again and my scores increased.!!!!!

Here it comes........

MIPS: 430
MFLOPS: 18.5


http://www.sysopt.com/forum/smile.gif http://www.sysopt.com/forum/wink.gif

[10.90streetcar]

1126/52.4
PIII 750 @ 997.5
256 megs of pc 100 @ 133
Radeon 64DDR Set at default.

[Wizzard~Of~Ozz]

Duron 750 @ 1Ghz

MIPS value is 1038 (Million Instructions Per Second) [0.77 sec]
MFLOPS value is 65.2 (Floating Point test) [0.66 sec]

[JBilbao]

Intel Desktop Board D815EPEA2
Intel Pentium III 800EB
384MB PC133 Kingston

MIPS3 v3.1a - Jari Karppinen 21.3.97 jakap@wmdata.com - Compiled by Turbo C++

Processor performance test in progress...

MIPS value is 909 (Million Instructions Per Second) [0.88 sec]
MFLOPS value is 45.7 (Floating Point test) [0.94 sec]

[Psyiode]

1632/78.2
1.4 tbird @ 1.552
256mb pc2100 kingston ram

[JBilbao]

Intel Desktop Board D815EEA
Intel Pentium III 1GHz
256MB PC133 MemoryCard Tech

MIPS3 v3.1a - Jari Karppinen 21.3.97 jakap@wmdata.com - Compiled by Turbo C++

MIPS value is 1038 (Million Instructions Per Second) [0.77 sec]
MFLOPS value is 52.4 (Floating Point test) [0.82 sec]

[Potlicker]

Gaston, I am sorry I should have Included specs. 1.4 thunderbird 266 running at 1.610 512 megs of Infineon 166mhz mem.

[^hyd^]

P3 500 256MB PC100

MIPS: 583
MFLOPS: 24.4

[Sweeper]

Athlon 1.2GHz (200) (not overclocked)
384mb PC133 SDRAM
1111 MIPS
MFLOPS 65.2

Just ran it while online, etc. Don't know if it would increase much if I shut some apps. down.

Well, tested it again. This time with only 256mb Cas 2 PC133 SDRAM (instead of the 384mb Cas 3)
1.2GHz @ 1.32GHz 12x110
1311 MIPS
66.2 MFLOPS

Sweeper


[This message has been edited by Sweeper (edited 09-03-2001).]

[Potlicker]

I am the fastest na na boo boo LOL. for now anyway

[Gaston]

Complete listings of MIPS/Mflops PO bench
at http://www.volny.cz/v.reif/mips.txt

[LostBok]

1126/51.8

I DON'T think this thing uses ANY MP support... that was run on a dual P3-1Ghz, 512meg CAS2 SDRAM.

After seeing everybody else's, I was expecting 2000/100 http://www.sysopt.com/forum/frown.gif

Let me know when the multi-cpu version is out!! http://www.sysopt.com/forum/smile.gif

For all of you who have been following my dilema's about CPU's/systems - this isn't my games machine, this is one of my 18 work-horse computers... I do a lot of number crunching http://www.sysopt.com/forum/smile.gif

[This message has been edited by LostBok (edited 09-06-2001).]

[Gaston]

MIPS3 bench program is designed for
DOS.

Multiprocessor system is not supported.

Clibench MKIII has multiprocessor bench test.
(no MIPS/MFlops bench, but operations per second)

[otheos]

T-Bird 900@1435
1443MIPS
87.8MFLOPS


Duron 700@1000 (7.5x133)
1112MIPS
72.8MFLOPS


[This message has been edited by otheos (edited 09-06-2001).]