Msand9898
10-29-2000, 05:36 PM
AMPTRON 3748LMRT MAINBOARD
RETAIL BOX
$ 68 SHIPPED USPS **** SOLD ***
KEY FEATURES
1. Supports both Slot1 & Socket 370.
Pentium-III support for 450-800MHz processors
Pentium-II support for 233-450MHz processors
SEPP Celeron support for 266-533MHz processors
PPGA Celerons run from 300 - 533MHz
2. SiS620/5595 chipset.
3. Supports Pentium II/III and Celeron processors running at BUS speeds of 66/100MHz
4. Supports up to 768 MB or SDRAM using three 168-pin DIMMs.
5. 1 PCI, 1 ISA, 2 USB, 1 Serial, 1 Parallel and 1 MIDI port.
6. Provides AT/ATX power management features including 'Wake on LAN', 'Wake on RTC',
7.'Wake on Ring' and 'Keyboard Power On/Off'.
8. SiS620 Built-in 64-bit 3D v1.0 AGP Graphics accelerator which shares up to 8 MB of main system memory to act as a frame buffer.
9. Built-in C-Media CMI8738 3D surround sound system with 24-bit digital audio interface and 44 kHz sample rate.
10. Built-in Davicom 9102 fast PCI 10/100 Base-T Ethernet adapter with RJ45 jack.
11. Built-in hardware monitoring circuitry for monitoring cooling FAN RPMs, CPU temperature and operating voltages.
12. Built-in PCTel HSP56 MicroModem with voice features. Supports V.90, V.34, V.32bis, V.32, V.22, and V.22bis protocols.
13. Baby-AT form factor.
14. 100% Linux compatible hardware.
------------------------------------------------------
ABIT BH6 MAINBOARD available NOW...
$ 58 SHIPPED USPS
KEY FEATURES
1. Pentium II 233-750+,
Celeron (A) 266-558+ (Well, you know)
Top MHz supported: 731 MHz (133*5.5)
2. Clock Multipliers 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5
3. Bus Speeds 60, 66, 75, 83.3, 100, 103, 112, 124, 133
(103 MHz obtained by enabling Turbo Frequency)
3. CPU voltage settings 1.30v - 2.10v (.5v increments), 2.2v, 2.3v
4. System Memory Three 168-pin DIMM sockets supporting SDRAM, 384 MB max. (8, 16, 32, 64, 128 MB)
5. Expansion Slots 1 AGP 2x, 5 PCI, 2 ISA (All Full-length)
6. Internal/External I/O Floppy port supports up to 2.88MB and mode 3 floppies
7.Ultra DMA/33 IDE supports up to 4 devices (Including LS-120)
8. Two built-in external USB connectors
9. Two 16550 fast UART serial ports
10. Built-in Standard/ECP/EPP parallel port
11. PS/2 mouse and keyboard connectors
12. IrDA Infrared port header (not external)
13. Wake-On-LAN header
14. SB-LINK header
15. Form Factor ATX: 305mm x 190mm (12"x7.4" )
16. Miscellaneous Award BIOS w/ CPU SOFT MENU™ II
17. Supports ACPI and DMI
18. Motherboard temp, CPU fan speed, and voltages monitoring
19. Year 2000 compl
[This message has been edited by Msand9898 (edited 10-30-2000).]
[This message has been edited by Msand9898 (edited 10-31-2000).]
RETAIL BOX
$ 68 SHIPPED USPS **** SOLD ***
KEY FEATURES
1. Supports both Slot1 & Socket 370.
Pentium-III support for 450-800MHz processors
Pentium-II support for 233-450MHz processors
SEPP Celeron support for 266-533MHz processors
PPGA Celerons run from 300 - 533MHz
2. SiS620/5595 chipset.
3. Supports Pentium II/III and Celeron processors running at BUS speeds of 66/100MHz
4. Supports up to 768 MB or SDRAM using three 168-pin DIMMs.
5. 1 PCI, 1 ISA, 2 USB, 1 Serial, 1 Parallel and 1 MIDI port.
6. Provides AT/ATX power management features including 'Wake on LAN', 'Wake on RTC',
7.'Wake on Ring' and 'Keyboard Power On/Off'.
8. SiS620 Built-in 64-bit 3D v1.0 AGP Graphics accelerator which shares up to 8 MB of main system memory to act as a frame buffer.
9. Built-in C-Media CMI8738 3D surround sound system with 24-bit digital audio interface and 44 kHz sample rate.
10. Built-in Davicom 9102 fast PCI 10/100 Base-T Ethernet adapter with RJ45 jack.
11. Built-in hardware monitoring circuitry for monitoring cooling FAN RPMs, CPU temperature and operating voltages.
12. Built-in PCTel HSP56 MicroModem with voice features. Supports V.90, V.34, V.32bis, V.32, V.22, and V.22bis protocols.
13. Baby-AT form factor.
14. 100% Linux compatible hardware.
------------------------------------------------------
ABIT BH6 MAINBOARD available NOW...
$ 58 SHIPPED USPS
KEY FEATURES
1. Pentium II 233-750+,
Celeron (A) 266-558+ (Well, you know)
Top MHz supported: 731 MHz (133*5.5)
2. Clock Multipliers 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5
3. Bus Speeds 60, 66, 75, 83.3, 100, 103, 112, 124, 133
(103 MHz obtained by enabling Turbo Frequency)
3. CPU voltage settings 1.30v - 2.10v (.5v increments), 2.2v, 2.3v
4. System Memory Three 168-pin DIMM sockets supporting SDRAM, 384 MB max. (8, 16, 32, 64, 128 MB)
5. Expansion Slots 1 AGP 2x, 5 PCI, 2 ISA (All Full-length)
6. Internal/External I/O Floppy port supports up to 2.88MB and mode 3 floppies
7.Ultra DMA/33 IDE supports up to 4 devices (Including LS-120)
8. Two built-in external USB connectors
9. Two 16550 fast UART serial ports
10. Built-in Standard/ECP/EPP parallel port
11. PS/2 mouse and keyboard connectors
12. IrDA Infrared port header (not external)
13. Wake-On-LAN header
14. SB-LINK header
15. Form Factor ATX: 305mm x 190mm (12"x7.4" )
16. Miscellaneous Award BIOS w/ CPU SOFT MENU™ II
17. Supports ACPI and DMI
18. Motherboard temp, CPU fan speed, and voltages monitoring
19. Year 2000 compl
[This message has been edited by Msand9898 (edited 10-30-2000).]
[This message has been edited by Msand9898 (edited 10-31-2000).]