Richard_Cranium72
07-16-2001, 07:50 PM
For the system builder who wants intergrated video and sound.
*NOTE*
This is NOT the horrid VC-820 mobo previously featured at compgeeks
Intel ATX Socket 370 Motherboard - CA810
Processors Supported :
Intel Celeron 366 to 700MHz (PPGA and FCPGA Socket 370) at 66MHz Bus Speeds
Intel Pentium III 500 to 850MHz (FCPGA Socket 370) at 100MHz Bus Speeds
See Link Below for Specific CPU's
MicroATX Form Factor
Memory 2 x 168 DIMM sockets Supports up to 512MB(max)
Integrated Creative SoundBlaster ES1373
Intel 82810 AGPset -- Integrated 2D and 3D graphics engines ,
Integrated 230MHz DAC , 64-bit system memory interface
2 USB ports,1 Parallel port, Game Port, 1 Video Connector,
1 Serial port, Line-out, Line-in, MIC-in ,1 PS/2 Mouse and1 PS/2 Keyboard ports
4 dedicated PCI slots
Board Only with Drivers (on CD) and IDE/FDD Cables
Note: Some of the PCB's are labeled CA810e, but are definitely the CA810 board
http://www.compgeeks.com/details.asp?invtid=CA810
http://support.intel.com/support/motherboards/desktop/ca810/
http://support.intel.com/support/motherboards/desktop/ca810/procsupp.htm
To clarify, I KNOW this is NOT a tweakable board.
I KNOW it is not an Athlon board
I KNOW it is not a 133 mhz board
With that out of the way, OEM builders, start your engines http://www.sysopt.com/forum/smile.gif
*NOTE*
This is NOT the horrid VC-820 mobo previously featured at compgeeks
Intel ATX Socket 370 Motherboard - CA810
Processors Supported :
Intel Celeron 366 to 700MHz (PPGA and FCPGA Socket 370) at 66MHz Bus Speeds
Intel Pentium III 500 to 850MHz (FCPGA Socket 370) at 100MHz Bus Speeds
See Link Below for Specific CPU's
MicroATX Form Factor
Memory 2 x 168 DIMM sockets Supports up to 512MB(max)
Integrated Creative SoundBlaster ES1373
Intel 82810 AGPset -- Integrated 2D and 3D graphics engines ,
Integrated 230MHz DAC , 64-bit system memory interface
2 USB ports,1 Parallel port, Game Port, 1 Video Connector,
1 Serial port, Line-out, Line-in, MIC-in ,1 PS/2 Mouse and1 PS/2 Keyboard ports
4 dedicated PCI slots
Board Only with Drivers (on CD) and IDE/FDD Cables
Note: Some of the PCB's are labeled CA810e, but are definitely the CA810 board
http://www.compgeeks.com/details.asp?invtid=CA810
http://support.intel.com/support/motherboards/desktop/ca810/
http://support.intel.com/support/motherboards/desktop/ca810/procsupp.htm
To clarify, I KNOW this is NOT a tweakable board.
I KNOW it is not an Athlon board
I KNOW it is not a 133 mhz board
With that out of the way, OEM builders, start your engines http://www.sysopt.com/forum/smile.gif