Netgear 314 setup probs

[ooops]

O.K. ..... I thought this would be a no brainer , but anyway ...... I've got a DSL connection w/static IP's ,NOT PPPoE , went thru the setup wizard changed all 3 'puters to "obtain IP etc ." set their gateways as 192.168.0.1 ...... on the router I set it to one of my static IP's , set the gateway IP and subnet mask ...... no go ..... I can ping all the machines internally , but of course can't get out ...... what else am I missing ?/ .... is there something else I need to set somewhere in the router?? Changed it all back to where I was to get some help from you guys and gals .... thanks

[engracio]

ooops,

two things, first I think you need to set up all of your computers to get their ip address from the router since it also acts a dhcp also to be able to share your dsl line. once all of your computers has been reset then each one must be rebooted so that it can get its 192.168.0.*** address from the router.
then each one should be able to surf the net on its own.

e

[ooops]

I did that " set each to Obtain IP automatically" ... I can ping all boxes internally .... gateway is set to 192.168.0.1 on each .

[engracio]

ooops,

Do ipconfig /all on all of your computer to confirm that each one has 192.168.0.** addy. Once verified, then go to the router manager, 192.168.0.1 then your password which should be 1234 unless you changed it. Double check that you have the host name your isp gave to you, most of all check the "spoof this address" on the router manager menu so that each of your computer can pretend it is 192.168.0.2 . Good luck.

e