enabling 4 way interleave

[Kuasimodem]

You may still have to enable it in the bios of the motherboard. My KT7-RAID works beautiful, I enabled 4-way interleave and got about a 15% increase in memory benchmarks (and 3DMark2001).

Just go thru every page in the bios setup (or look in manual) to find the 4-way interleave settings, enable it, and reboot.

[Ricardo]

De Joker, if you do not find in Bios the 4 way interleave and if your MoBo use a VIA chipset, go to www.viahardware.com (http://www.viahardware.com) and download a little program that does it(download page). It´s work great for me(Asus P3V133+PIII600E at 900Mhz))and gave me something between 20 to 25 % of memory speed increase.

Good luck http://www.sysopt.com/forum/wink.gif

[De Joker]

How do i enable 4 way interleave i already ran wpcredit made the changes saved a reg file, ran the reg file rebooted. But sandra still shows that its not enabled yet. What am i doing wrong.

[De Joker]

That's the problem i downloaded the program and ran the program made the changes but still sandra says 4 way interleave supported but not enabled.

[Tron]

well... try setting Mem-Timing to Auto!!!
works on newish MSI-bords for Soket-A.

Peace\__________wolF<<

[DemonKnight]

you need this one http://www.viahardware.com/download/george/MemoryEnable.zip not wpcredit.(only for VIA chip sets)

[This message has been edited by DemonKnight (edited 06-29-2001).]

[Ricardo]

De Joker, sometimes the program doesn't work because the memory sticks are uncompatible. VIA chipset have some compatibility problem with high or lower density memory sticks, I don't remember right now, but the guys here will tell you about this and you can read about in the site of VIAHARDWARE.
Try to find the text about MEMORYENABLER program, it is the program that I'm using. FYI in my office I have a VIAgra Motherboard and memoryenabler doesn't work with the memory installed(64MB, 2 32MB boards), Sandra keeps me informed that my memory still remain in 1 interleave.
Good luck http://www.sysopt.com/forum/wink.gif

[De Joker]

Thanks for the replys guys i downloaded memoryenabler and it worked i got a 12% gain on the mem benchmark in sandra.