//flex table opened by JP
PDA

Click to See Complete Forum and Search --> : help in conecting power led

irene peralta
03-13-2001, 02:02 PM
I need help PLEASE.
I disconnected the tree case LEDS/
one for the hhd ,one for the reset led,and one for the power LED.
I can connect the hhd and the reset but I can't get the power one working. I tried all available but nothing happens.
I can read in bios that is a cyrix m| |-333 buid in 12/10/1998 and tis number cames up 32768kb
Bovon
03-13-2001, 03:04 PM
If you know which pins the led is supposed to connect to, and it dosn't work...turn the plug around half way. A led is correct voltage dependent, if you apply a positive voltage where it should be negative voltage, the led will not come on. Led means Light Emitting Diode...and all diodes work only one way. Try that if you are certain which pins the plug is supposed to go on.
Roy
03-14-2001, 06:24 PM
We would need to know the motherboard maker and model to find the pinout.

Of course, the system works without the LED, and usually you can tell if it's on by listening for the PS fan. http://www.sysopt.com/forum/wink.gif