my apologies to asus and good bye abit

[dedsoulz]

i have finally fixed my abit kt7 mb!!!
36ounce ball peen hammer did wonders on this piece of ****.back to good ole asus ,never to stray again
anyone thinking about this mother board should go pauls faq page and just look at what it takes to get this pice of junk to work.i spent alot of money for a high end system,i spared no expense.only to have to spend a week jumping through hoops.800 number for abit? LOL.board is ****,support is ****.
just had to get that outta my system!

[daverme]

Has anybody out there had a problem with an Abit board with an Intel chipset on it ???

[thekingofpain]

Hmmmm, bummer, mine has been working fine for months???

[FrozenLiquidity]

No problems here with my Secondary system, running Dual Celeron 400s on the Abit BP6!

You know that the BP6 is a great motherboard when they have their own user-made website dedicated to this motherboard. http://www.sysopt.com/forum/smile.gif

www.bp6.com (http://www.bp6.com)
Try it!!!

FrozenLiquidity

[Tom Teriffic]

Up until a couple of weeks ago, I'd had good luck with Abits with BX chipsets. A couple of Be6-II's (Rev 1.1 and rev 2), although the Rev 1.1 gave me some blues during a BIOS flash. My venerble BX6-6's were overclocking kings, until just the past couple of weeks, when the decided they were barely going to boot at stock speeds, and forget bumping it up. The monitor would go into standby and not come back. No amount of vidcard swapping or anything else would get them to behave as they had done for years up until that point.

So, I went out and got an ASUS CUSL2 today. Installing the 815 chipset drivers gave me a bit of a runarlund, but it's happy and fast, and all the rest of the hardware went in without a hitch. I think I just found my new Wintel platform.

BTW, is there a way to seeoparately adjust the AGP bus divider in the CUSL2 BIOS?

[dedsoulz]

follow up http://www.sysopt.com/forum/smile.gif

well i just received my asus board today.i went with the asus a7pro.it took me 15 min to install board and 15 minutes to install all hardware.i been running stable for 3 hours now,not one glitch.
my jaw just hung open as everything just installed with out ONE glitch.

all is good with world again ! http://www.sysopt.com/forum/smile.gif