Jeff7
08-30-2000, 10:19 PM
If this has already been found, then please just let me enjoy the glory. http://sysopt.earthweb.com/forum/smile.gif
The Asus P5A board's manual lists 3.5v as the lowest setting for the 3.3v bus. I found a way of making it 3.3v. Next to the DIMM1 socket, there is a little silk-screened chart. It says that if VIO0 (that's vee-eye-oh-zero) is set to jumpers 2-3, it will be 3.3v. Now find jumpers VIO1 - right next to it is an identical set of 3 pins. That is VIO0. It's pin1 is the same direction as VIO1. Set it to 2-3 - BIOS should now report the 3.3 voltage as 3.3v.
The Asus P5A board's manual lists 3.5v as the lowest setting for the 3.3v bus. I found a way of making it 3.3v. Next to the DIMM1 socket, there is a little silk-screened chart. It says that if VIO0 (that's vee-eye-oh-zero) is set to jumpers 2-3, it will be 3.3v. Now find jumpers VIO1 - right next to it is an identical set of 3 pins. That is VIO0. It's pin1 is the same direction as VIO1. Set it to 2-3 - BIOS should now report the 3.3 voltage as 3.3v.