//flex table opened by JP

Click to See Complete Forum and Search --> : SCSI QUESTIONS!!!


rthebest
04-08-2000, 11:56 AM
I had a question, I was thinking of buying the Yamaha CRW4260TXPM (http://www.yamaha.com/cgi-win/webcgi.exe/DsplyModel/?gHDR00007CRW4260TXPM).

It is an external cdrw drive that requires a SCSI card, but it doesn't specifiy which type. Will I be able to use a 50pin regular SCSI card, or do I have to have a 68 pinn UW Card?

And currently I have a Promise ATA/66 PCI controller. Will the two controllers be able to work on the same system together?

Any help would be greatly appreciated, thanks.

Stan
04-08-2000, 02:00 PM
Hi

The spec say that it is a U2W. So. it has a 68 pins SCSI connector at the back.
U2W is backward compatible, so you can use it with older SCSI adapter, as long as you have the right cable !

http://www.yamaha.com/cgi-win/webcgi.exe/Specs/?gHDR00007CRW4260TXPM

Stan

BBA
04-08-2000, 02:53 PM
Unless you take the drive out of it's case and use it internally, you do not need a 68pin UW cable. You will need an external cable, but the ends will vary depending on your SCSI adapters external connector. The unit, I think, has a standard SCSI2 external connector on it ( At least the external 4416SX I used did ).

I almost forgot to say...I use a U2W SCSI card for my Internal 6416S drive, and I also use a FastTrack Raid-0 drive array. It seems the Promise takes over all SCSI booting...as I can not even boot to a SCSI drive with teh Promise installed, so You should have no problems.

[This message has been edited by BBA (edited 04-08-2000).]

rthebest
04-08-2000, 04:31 PM
What exactly does U2W and the 68pin connector get you? Would this work just as well with the 50pin (SCSI2?) connector?

luqa
04-09-2000, 01:58 AM
It gets your external SCSI device connected to your machine so that you can use it. http://www.sysopt.com/forum/smile.gif

sys-eng
04-10-2000, 11:48 AM
I work with SCSI all the time but this is no place to hold a training class. www.scsita.org (http://www.scsita.org) is a very good site that probably already has all the answers to your questions.
SCSI is definetly better than ATA/DMA and that is why it costs more. But then again, EEC RAM is better than vanilla memory chips but most people will not pay the extra for a PC.