//flex table opened by JP

Click to See Complete Forum and Search --> : Asus P2B


GIMOER
03-23-1999, 05:32 PM
As I posted on Tom's HW board I found a webpage through Asus's HPage.It's a Japenese site and this fellow found out you can change the cpu voltage and use soft settings for bus frequency in Bios.It requires a soldering iron and a sober hand you have to remove a few caps and add a 3 pin jumper at JEN for the soft settings and 15 pin block near the VIO for the cpu voltage.I'm attempting this tonight and will post results after.This fellow in Japan has his Pentium II 350 runing 525(150x3.5)!!!

gecoffin
03-24-1999, 07:47 AM
Did it work?

Gary

MudMan
03-30-1999, 12:30 AM
Did it work? Inquiring minds want to know! I guess since we haven't heard that might be a bad sign?!

CRASHERKIL
03-30-1999, 09:51 PM
I have a ASUS P2B W/ P2-350 o/c'd to 463mhz at 2.0 core at 3.5x133mhz running fine with a VEK-12 attached without the intel coffin that it was in. With cpuidle it runs a cool 70f without it its at 77-80f go to alienpc.com to learn about this.

keep your cpu as cool as possible!!!