gdu
03-24-1999, 01:45 AM
ive got a k6-2 350 with 3d now, and a micronics c200 mb... can Anyone tell me the cpu core/bus ratio? Is that even my problem?
Click to See Complete Forum and Search --> : Please Check signal ...error......HELP!!
jokostel
03-24-1999, 05:21 PM
the main core voltage for the .25 mcron chips (the new K6 and the K6-2 and the K6-3) have a core voltage of 2.2v.
im running my k6 300 at 336 (112x3) on my FIC VA-503+ and it screams....
With the k6-2 they can be run 112 FSB+
***** MAKE SURE YOU DONT HAVE THE CPU UNDER RECCOMENDED VOLTAGE CAUSE IT WILL CAUSE DISK ERRORS AND WONT PROPERLY POST ALL THE TIME*****AND WILL CAUSE UNDESIRABLE HANGUPS DURING INTENSIVE CPU UTILIZATION!!!
hope this helps ya out... if ya still have problems e-mail me at: jokostel@usa.net
im running my k6 300 at 336 (112x3) on my FIC VA-503+ and it screams....
With the k6-2 they can be run 112 FSB+
***** MAKE SURE YOU DONT HAVE THE CPU UNDER RECCOMENDED VOLTAGE CAUSE IT WILL CAUSE DISK ERRORS AND WONT PROPERLY POST ALL THE TIME*****AND WILL CAUSE UNDESIRABLE HANGUPS DURING INTENSIVE CPU UTILIZATION!!!
hope this helps ya out... if ya still have problems e-mail me at: jokostel@usa.net
SysOpt.com
Copyright Internet.com Inc. All Rights Reserved.
Copyright Internet.com Inc. All Rights Reserved.