//flex table opened by JP
PDA

Click to See Complete Forum and Search --> : Core Clock Freq & Memory Settings: Info Please

jaida
05-14-2001, 01:27 PM
All I can say is go as high as you can go, Overclock that sucker to the max.

Basicallly play around with the settings and find the point as high as you can go where you have good stability and no presence of artifacts.
NDD
05-14-2001, 01:55 PM
Are you sure you got GF2 PRO ??? Usual settings for PRO card is <u>200/400</u>, maybe you underclocked yours by mistake ?
What card do you have ? Usually, you can try getting upto 220/450, without additional cooling installed, but be careful, if you noticing glitches/unusual artifacts - turn the clock down a bit ...

Best Regards ...
Brangwen
05-14-2001, 01:55 PM
jaida:

Thx for your response... I'll play with the settings "a bit."

ND:

I am about positive I do, unless GTS / Pro means one OR the other. When I first looked at Coolbits Hardware settings, it was set at 200/133. Thx.

Brangwen http://www.sysopt.com/forum/wink.gif




[This message has been edited by Brangwen (edited 05-15-2001).]
Brangwen
05-15-2001, 12:53 AM
Fellow Members:

I installed 3DCool software and am able to change my nVidia GeForce2 GTS Pro hardware settings for oc'ing. I'm curious: With my defaults being 200 core clock frequency and memory frequency set at 333, how high should I go? What guidelines should I use other than "trial and error" to set these values?

Thx!

Brangwen http://www.sysopt.com/forum/wink.gif

Iwill KK266 non-raid mobo
1.33 GHz 266FSB
512 MHz PC133 CS2 Micron/Crucial SDRAM
Jeff7
05-15-2001, 09:13 AM
I usually boost the speed in 5MHz increments. My Hercules GF2 card hit 245 core and somewhere around 380 with enough memory cooling.
Brangwen
05-15-2001, 02:52 PM
Thx for your results. I'll be leaving mine at defailt temporarily and just slightly oc'ing my cpu to 1.46 GHz. I'm making WAY to many "tweaks" and not writing down what I did! But I'll get back to it. I'm scoring around 3200 on Mark3D2001.

Brangwen http://www.sysopt.com/forum/wink.gif
jaida
05-15-2001, 05:07 PM
sounds like you got a good system going there.

Happy tweaking http://www.sysopt.com/forum/smile.gif
Brangwen
05-15-2001, 05:43 PM
Thx, jaida! http://www.sysopt.com/forum/biggrin.gif

I really appreciate the compliment and for most of my major components I researched like crazy. The rest was probably luck! There comes a point where you just got to make a choice and stop agonizing over the decision, like Iwill vs Abit mobos or AMD vs Intel processors. I'd never had an AMD before and they are fun and a challenge!

Brangwen http://www.sysopt.com/forum/wink.gif
NDD
05-16-2001, 05:43 PM
Happy happy, joy joy http://www.sysopt.com/forum/biggrin.gif

Best Regards ...
Brangwen
05-17-2001, 10:10 AM
ND:

"Congrats" on making it to the "Senior Member" club. Pretty obvious you were going for the "count." http://www.sysopt.com/forum/biggrin.gif

Brangwen http://www.sysopt.com/forum/wink.gif
NDD
05-18-2001, 05:54 PM
10x, Dude !!! http://www.sysopt.com/forum/wink.gif

Best Regards ...
Brangwen
05-19-2001, 02:18 PM
I thought I was bad...

Brangwen http://www.sysopt.com/forum/wink.gif