Dputiger
02-12-2001, 01:36 PM
If they do, how does one enable it? Do you use a splitter cable for dual monitor support, or does the card have two physical outputs (I would suspect this is the case).
| //flex table opened by JP
Click to See Complete Forum and Search --> : Do all GeForce MX cards support TwinView? Dputiger 02-12-2001, 01:36 PM If they do, how does one enable it? Do you use a splitter cable for dual monitor support, or does the card have two physical outputs (I would suspect this is the case). Kruzin 02-12-2001, 04:04 PM No, they don't all support TwinView. They must come from the mfg. equipped with the secondary RAMDAC and output, like this one: http://www.leadtek.com/geforce2mx/gf2mxdhpro.htm LiLRiceBoi 02-12-2001, 05:23 PM i read somewhere in a review that geforce2mx's dont use a second ramdac. they use some other means for the the 2 monitor support. matrox however does use the second ramdac. Rags 02-12-2001, 06:43 PM You read incorrectly. The MX Twinview has to have a secondary RAMDAC. Rags LiLRiceBoi 02-13-2001, 10:17 PM i guess i had it mixed up. matrox must use a different means of 2 monitor support, and the geforce2mx uses 2 RAMDACs LemonHead 02-14-2001, 09:34 AM No, I don't know about GF2MX, but the G400 has one 360MHz RAMDAC and one 230MHz RAMDAC which limits refresh rate at high res if both are used, somehow. Hell, i dont know, im not big on Matrox. I prefer Nvidia, best drivers. if this is a decision between a g400 and a geforce2mx i would check out this review. http://www.tomshardware.com/graphic/01q1/010206/index.html it compares the two. Hope this helps, m8. Sean ******* Rags 02-14-2001, 10:12 AM Lemonhead, You are incorrect. The G400 has a 300Mhz RAMDAC, and a TVO chip that will output to monitor as well, it's not really a RAMDAC. The G400 Max is the same but has a 360Mhz RAMDAC. The Maven TVO on the G400 is roughly equivalent to a 170Mhz RAMDAC though. Now, the G450 has a 360Mhz primary RAMDAC, and the secondary RAMDAC, which is also integrated on the core, runs at 230Mhz, and can output to TV. It's a bit different from the G400. Rags Fingers 02-14-2001, 11:34 AM The GEFORCE2 MX has the following TwinView options: -Two digital flat panels -Two RGB monitors (with second RAMDAC) -Two analog flat panels -Digital flat panel + analog flat panel -Digital flat panel + RGB monitor -Digital flat panel + TV -RGB monitor + TV -RGB monitor + analog flat panel (with second RAMDAC) -Analog flat panel + TV SysOpt.com
Copyright Internet.com Inc. All Rights Reserved. |