3d mark 99 with v3 3000

[jshaw34]

I,m getting a srange reading on diract x diagnostics it that says my v3 3000 has only 14 megs of ram instead of 16. I,m pretty sure this is causing me to get alot lower scores on 3d mark 99 than I should. Has anyone had the same problem and what was the solution. I do have direct x 7.0a installed along with latest v3 beta drivers .

[Ultima]

Soooo,

what score are ya getting????

Don't worry about the 14Mb thingie, for as far as I've seen on both of my pc's, and lately 3rd too, that don't do s**t to performance.

Pim

[jshaw34]

I,m getting these results at 166 mhz default speed. 2,Test My Project
Rendering Platform Voodoo3 PCI
Resolution 800*600
Color Depth 16-bit Color
Frame Buffer Triple buffering
Refresh Rate VSync Off
CPU Optimization Intel(r) processor
3DMark Result 2780.91 3DMarks
Synthetic CPU 3D Speed 3699.67 CPU 3DMarks
Rasterizer Score 2375.87 3DRasterMarks
Game 1 - Race 30.06 FPS
Game 2 - First Person 25.87 FPS
Fill Rate 157.38 MTexels/s
Fill Rate With Multi-Texturing 302.07 MTexels/s
2MB Texture Rendering Speed 320.71 FPS
4MB Texture Rendering Speed 275.20 FPS
8MB Texture Rendering Speed 191.25 FPS
16MB Texture Rendering Speed 5.31 FPS
32MB Texture Rendering Speed 2.60 FPS
Bump Mapping Emboss, 3-pass 125.52 FPS
Bump Mapping Emboss, 2-pass 158.89 FPS
Bump Mapping Emboss, 1-pass 0.00 FPS
Point Sample Texture Filtering Speed 0.00 %
Bilinear Texture Filtering Speed 0.00 %
Trilinear Texture Filtering Speed 0.00 %
Anisotropic Texture Filtering Speed 0.00 %
6 Pixel/individual 0.00 KPolygons/s
6 Pixel/strips 0.00 KPolygons/s
25 Pixel/individual 0.00 KPolygons/s
25 Pixel/strips 0.00 KPolygons/s
50 Pixel/individual 0.00 KPolygons/s
50 Pixel/strips 0.00 KPolygons/s
250 Pixel/individual 0.00 KPolygons/s
250 Pixel/strips 0.00 KPolygons/s
1000 Pixel/individual 0.00 KPolygons/s
1000 Pixel/strips 0.00 KPolygons/s
Processor Type Intel Celeron A
Processor Speed 400 MHz
L1 Cache size 32 KB
L2 Cache size 128 KB
Physical Memory 128 MB

[Ultima]

I got my voodoo 3 2000 running in a k6-2 system.
I haven't o/c'ed my v3 exactly, but through the fsb.

I have my 450 @ 540, which is with a 120Mhz fsb, which results in 40Mhz pci.
I'm getting around 3200 3DMarks and 6500 cpu 3dmarks.

Pim