overclocking an annihilator???

[silas]

hello folks,

I have removed the fan on the annihilator, in favor of a larger pII fan.
What do you recommend I do to overclock it?

Thanks for any help.

[skywalker[TSG]]

i would get powerstrip its the best software to use when overclocking a video card

[thekingofpain]

Luckily, NVIDIA has included such a utility in their driver set, it is not enabled by default. To get the core and memory overclocking utilities, run regedit and perform the following steps:
1. Open the key, [HKEY_LOCAL_MACHINE\Software\NVIDIA Corporation\Global\] by navigating down to it in the left hand pane.
2. Add a new key named "NVTweak".
3. Go under this new key and add a new DWORD value with the name "CoolBits".
4. Double click on CoolBits in the right hand pane and set the value to 3 with a hexadecimal base.
5. Reboot.
After performing these steps, an overclocking screen will be available under the additional properties of your video card. First you must enable overclocking by clicking on the "enable" check box. After a reboot, you should be ready to overclock. Before enabling the core and memory speeds you select, the utility will "test" the configuration. Gotta run the test and can not use the new settings until they are tested. Its best to check the box which enables the new settings to be applied at startup as the program works best if the computer is rebooted between each overclock http://sysopt.earthweb.com/forum/smile.gif

[silas]

thanks for the help, 'king'.