daveleau
01-06-2000, 01:49 PM
I installed a CL-Annih. in my machine last night and everything went fine except none of my USB peripherals work now. I have the 2 ports on the mobo and 2 on an add-on card to double the bandwith limitation of 12 MB. I go into the devic managers and it says my General root hub is not functioning properly and to check all plugs to make sure they are secure. This affects all 4 ports and all devices. Here are my system specs:
Soyo 5EMA+ v1.0
K6-2 400 @ 450 (2.4 V and 100MHz fsb)
2 hdd
2 128MB PC100 (256 total)
Tosh 1202 6x DVD
HP 8110i CD-RW
SB Live! value
CL Annihilator
Q-Link USB PCI card
External Zoom dual mode 56K V.90
tons of fans
USB M$ Explorer w/ intellieye
USB Zip 100
USB Altec Lansing ADA70 speaker set
USB Hauppage TV decoder card
USB external powered hub (for future additions)
Everything works except the USB devices and I have disabled hardware on IRQs 7,3 and 9 (LPT1, Com2, SB Live!) to see if it was an IRQ error since all were full. I replaced a Voodoo3 3000 with the Annihilator. Windows is also now unstable. It has randomly rebooted several times. My hdd was defragmented just a few days ago. My registry was clean of errors before the installation. The only problem is my this USB general root hub. Any ideas? Thanks and sorry for the long post.
LMK if I can give more info.
Dave
Soyo 5EMA+ v1.0
K6-2 400 @ 450 (2.4 V and 100MHz fsb)
2 hdd
2 128MB PC100 (256 total)
Tosh 1202 6x DVD
HP 8110i CD-RW
SB Live! value
CL Annihilator
Q-Link USB PCI card
External Zoom dual mode 56K V.90
tons of fans
USB M$ Explorer w/ intellieye
USB Zip 100
USB Altec Lansing ADA70 speaker set
USB Hauppage TV decoder card
USB external powered hub (for future additions)
Everything works except the USB devices and I have disabled hardware on IRQs 7,3 and 9 (LPT1, Com2, SB Live!) to see if it was an IRQ error since all were full. I replaced a Voodoo3 3000 with the Annihilator. Windows is also now unstable. It has randomly rebooted several times. My hdd was defragmented just a few days ago. My registry was clean of errors before the installation. The only problem is my this USB general root hub. Any ideas? Thanks and sorry for the long post.
LMK if I can give more info.
Dave