//flex table opened by JP
PDA

Click to See Complete Forum and Search --> : P933 overclock???

bol
10-06-2000, 03:02 PM
It seems that the multiplier is set to 7. Is it possible and wise to set the Busclock from 133/33 to 140/35? bye to all
JBKILLA
10-06-2000, 08:54 PM
140/35 shouldn't be a problem at all since your pci will only be only 2mhz over speed
it should be safe with no problem at all.
Go ahead and try it !!
Happy O'cing http://sysopt.earthweb.com/forum/smile.gif
daveleau
10-06-2000, 09:24 PM
Double posting the same question won't get a faster response, it will just tick off the mods. http://sysopt.earthweb.com/forum/smile.gif

That said...
140 should be fine but the PIII EB CPUs are not the best OCers sinc eth fsb is already so high. Good luck. I hope you have good RAM and watch the AGP/PCI dividers.
Dave
http://sysopt.earthweb.com/forum/Forum3/HTML/008660.html

[This message has been edited by daveleau (edited 10-06-2000).]