Need recomendations for a good fan (for my celeron 433 PPGA)

[Tekk]

I have an Abit BF6 motherboard so I am using an Iwill slocket. I am currently running at 75mhz FSB so that yields 488 and I haven't had one single heat problem. Its as stable as a rock. But now I wanna push the envelope a little farther and see what I can get but i am still running the stock intel fan and HS. So for those of you who have a similiar setup..could you recommend a good fan for me? Thanks for any help.

And for any who have a 433 o/c, what are you running at?

[Snuffy!]

I say get the PPGA Golden Orb Cooler. With it, I am running my celeron 600 stable @ 954 on my BF6 with voltage @ 1.75. And they are so cheap. I bought my Golden Orb Cooler for $30 Australian. Which is something like $15 American. Before I got my celeron 600, Just a short while ago, I was running a
celeron 433, with a standard fan/heatsink, I could run it stable at 585 (6.5 x 90).

Mt friend is running his 466 @ 582 (7 x 83)no problems at all on his BX6 Rev.2 with a standard heatsink/fan.

[Barney]

If it's just a fan you're looking for,buy a 6cm fan (about 2cm high).From my experience I know Sunon is really good.

Ronald

[krusty the klown]

GlobalWin Fop32 + Arcric Silver thermal paste is a good coolind setup too http://sysopt.earthweb.com/forum/smile.gif