cooling upgrades

[neo_otyugh]

looking to get a better heatsink/fan combo for my celeron2. lot of people seem to be using the golden orbs...but what is better than that? i also want to find a copper plate with a cut out for the core of the celeron that will fit between the heatsink and cpu...seen links to em here before but need to get em again (would make my own plate, but i don;t have the time)
any suggestions are appreciated

btw the processor is on a slocket on and abit bf6 and i need all three DIMM slots

[Szech]

The Alpha PEP66 seems king of the hill right now. It has a copper bottom too, so you wouldn't have to have a plate there. But if you want the copper plate that goes AROUND the bump of the CPU, then you can get those here: http://www.3dfxcool.com/coppershim.htm

[spark25]

Make sure that your mobo can handle the height of the bigger coolers. Some have problems with the cooler taking up a DIMM slot due to the height,if you are running on a slot 1 board with a slocket.If so look into the globalwin FPK-32