Some help for AMD overclockers

[chemgod]

One thing to try if your win95 gives you a protection fault when overclocking is to download the AMD k6-2 patch at microsoft.com...my system (shuttle HOT-569, AMD-k6-2 300/66 ) has been running at 337 using 2.3v 4.0X83.3 with no stability problems since i installed the patch....the chip never gets above room temp even when running quake2 for hours....

anyone ever have sucess w/ 4.5 X 83.3? my system wont boot at that setting...

[Ricardo]

Mine is running at 400 Mhz(4x100) with no problems and cool. Try to use a little program called setk6. It would be help.

Good luck

Ricardo

[biggdogg]

I am very interested in overclocking my ADM K62-300mhz. Can anybody point me in the right direction or show me how? Thanks Very Much!

Peace

BiggDogg

[neo_otyugh]

biggdogg...what motherboard do you have? that will be the most limiting factor right off...if it is a clone system, you probably can overclock it fairly easily. recently i overclocked a friends computer. it is an acer aspire desktop...it had a k6-2 300 in that now runs at 366 at stock voltage...that board did have jumpers for increased multiplier and bus speeds though and many name brand systems will not...

[biggdogg]

Thanks for writing, neo.

It's a compaq presario 2256. I am in the process of obtaining info on the motherboard right now but I keep hitting brick walls.

Is it hard to do cause I just bought quake 3 arena and you need 350 mhz. (I got 300mhz) and I've been told that I CANT upgrade my processor.

Peace