How do i OC with Slotket

[fvay]

I have an abit slotket. do i have to change the settings on slotket or only in bios

[CMonster]

Not being familliar with the Abit Slocket I would have to ask what are the setting options of the slotket and what type of CPU are you trying to overclock?

If it is a Celeron CPU most likely you will have to set the slotket for 100mhz FSB, but if it is a CU-mine then perhaps no change has to be made on the slotket - only on the motherboard/BIOS.

~edit: there is probably also a core voltage option on your slotket



[This message has been edited by CMonster (edited 06-28-2000).]

[fvay]

there are jumpers for FSB setting(Auto,66,100) and core voltage setting on the board. i guess i have to set the jumpers and then change in bios.
I m using a celeron 366

[neo_otyugh]

what motherboard are you using?? on the abit bf6 and abit slotket !!! that i have, i jsut set the mobo and slotket to defualt and run everything from bios...

[fvay]

i m using abit BH6.
and you are right. i just let the slotket on auto and changed fsb speed in bios. it worked.