overclock celeron 400 boot up problem

[thedude]

Hi,

I have a slot 1 celeron 400 and Matsonic MS7192S m/b. When I set the FSB above 66Mhz OR set the multiplier above 6.0x, it boots up perfectly fine until I get to Windows98. It slows down a lot, shows my wallpaper, loads my anti-virus program then freezes. I know I don't have a cooling problem because it only runs about 100 degrees.
What do I do?

[oblivion]

Does that moboard support voltage tweaks?Ifso try raising the CPU voltage to 2.2 and try using the 100Mhz FSB..............

We will need more info.

[Nixona]

Antivirus softare is a pain too, try and disable that on startup using msconfig, and see if it loads any farther. I know antivirus is important, but I like a fast boot, so I just watch what I download http://sysopt.earthweb.com/forum/smile.gif

[thedude]

Motherboard does not support any voltage modification. But, would I really need to change the voltage setting only to get any extra 50Mhz out of my 400 Celeron?

I'll try the antivirus thing and see if it works.

[narayan]

Maybe an extra .1v will help, maybe not. It's one of the things to try. http://sysopt.earthweb.com/forum/smile.gif

[Brydon]

This will show you how to change the voltage on a slocket but be carefull http://sysopt.earthweb.com/forum/smile.gif. http://www.geocities.com/celeron_overclocker/voltage1.htm