What have U done for me Lately?zzzzzzzzzzzzzzzzzzzzz

[akaBruno]

Submit your new OC posts, including time and space travel.
AMD K6-2.2AFX 500 @ ^)) i mean 600= 100x6. 2.8 very cooled volts.
NEXT ???

[GIMOER]

Have PII400 currently oc'd to 480mhz(120x4@2.05v) on the Abit VA6.In need of better cooling to get this pig screaming at 533.

[Chaostician]

I have an Abit BF6 with a Celly 366@550. I Pumped it up to 596 (not stable) and Win98 Lock's at 602mhz. My next step is to get bigger "C" clamps for my HP Orb and try a ThermoElectric cooler (peltier).

Yes, My HP Orb is being held on with 2 "C" clamps... wish I had a camera so I could post pic's. http://www.sysopt.com/forum/smile.gif

-Chaostician

[JeffD78]

Azza PT-6VAX2 and Celeron 466@581 (7.0x83). Celeron's got a Cooler Master HS and fan. I turned the fan around to take air off the CPU, put two Radio Shack blowers on it, blowing in from the sides of the HS. Also used thermal grease on it. It gets up to about 100-102 degrees farenheit under 100% load.

[This message has been edited by JeffD78 (edited 03-26-2000).]

[Amorpheous]

Running an AHX 2.4v K6-3 400 @ 450 2.5v. This is on a Tyan 1590s mobo w/ 1mb L3 cache. Using Aavid heavy duty heatsink and fan with thermal paste and a Nidec Gamma28 blowing on the heatsink for additional cooling...idles at 42 C, 46C after a game of Unreal Tourney.
Gonna try for 500mhz soon as I get a new heatsink and fan setup

[This message has been edited by Amorpheous (edited 03-28-2000).]

[cpucook]

I have an AHX 2.4v K6-2 450 running 2.6v 5x100 @ 506Mhz. Runs about 40-45c. I run an FIC 503+ mobo.I am currently building a water cooler to try for 2.8v 5x112.