//flex table opened by JP
PDA

Click to See Complete Forum and Search --> : Burnt????

Cryptic I
03-26-2000, 05:47 AM
I pushed my K62-450 to 575 on 3.0 volts w/ no results. I pushed it back down in interveals of 25mhz & .1 volts all the way down to stock due to flaky performance after that. On 3d games she locks up. Never did that before my 575 attempt. Did I slightly burn the edges of the chip... ...so to speak. Any ideas?

Thanks.
buddmann
03-26-2000, 07:15 AM
It sounds to me like you may have done some damage to your chip,ie(running 3 volts is pretty high)but more info is needed to detemine what the problem may be.
What type of system do you have,temps,etc.etc.

buddmann
akaBruno
03-26-2000, 07:53 AM
Try resetting your cmos and start over. Cooling may be an issue. Also defrag & clean out lost clusters etc... And do some bench marking to compare results.
Brydon
03-26-2000, 08:01 AM
Sounds like you might have damaged the on-die 64kb cache. Have you got any previous benchmarks to try it with...it seems that three volts is to much for these suckers http://www.sysopt.com/forum/frown.gif
Cryptic I
03-26-2000, 10:19 AM
My CD-rom drive is now acting flaky to. A creative 48x is now benchmarking on sandra as a 8x... ....clueless...