k6-266 to450 with 2.4V core with motherboard LuckyTech??

[smartflorin]

Please say to me if with k6-266 can i get 450Mhz with a motherboard like LuckyTech and 64 M ram PC-100
Actualy it's running at350..can i get more..?

thank you....

[AnakiMana]

I'd suggest increasing it in small increments, and up the voltage when it stops working. Remember, though - the higher the voltage, the more cooling you'll need! When you reach the OC limit for that processor, try to come up with more cooling!

I don't know the limits of that specific processor, but you can look it up at www.overclockers.com (http://www.overclockers.com) in their database! Maybe somebody else can suggest a maximum heat for that one.

Hope this helps.
AnakiMana

[deep_sky]

i can tell you now that 2.4V processors do not overclock well, so you can pretty much forget 450 with that chip....300 to 350 would be a more realistic goal...at 2.4V it is already hot, and you do not have too many more increments of .1V before you hit a limit that you do not want to go over (around 2.7V, any more and you shorten the life of your chip considerably).....amd k6-x in general are not highly oc'able....