//flex table opened by JP

Click to See Complete Forum and Search --> : Peter Missell..Help with amptron9600/w/amd k62 350chip


ram
01-03-2000, 04:59 PM
I have the amptron 9600 board,if you remmber
in a earlier post,you said it was not a PcChips 575,can ya look in that post agin and check the bios number there for me?PCchip board says it is a 575 unless im reading it wrong.Also what voltage and multiplyer do i use to get the 375mhz you mentioned. 83 x what? thanks for all the help.... http://www.sysopt.com/forum/smile.gif http://www.sysopt.com/forum/smile.gif

Mntsnow
01-03-2000, 08:02 PM
375mhz divided by 83fsb = 4.5x multiplier http://www.sysopt.com/forum/smile.gif

Mntsnow

Peter M
01-07-2000, 09:24 AM
Hi!

The PM9600 is a PC-Chips design, yet an Amptron exclusive. The 575 has sound onboard and 64 MB cacheable area, while the 9600's uniqueness is the 512 MB cacheable area - and it has no onboard sound.

Either board has a 1999 BIOS update available that runs K6-2 and K6-III well.

And for basic math, what exactly is the problem in doing a division of 375 by 83 and finding out that the result is surprisingly close to 4.5? :-)

Regards, Peter

deep_sky
01-07-2000, 11:06 AM
Peter..
you outght to start charging for all the pcchips help you give on this board. It is amazing how many people own a pcchips board, and you seem to be the local expert =-)...

ram
01-07-2000, 05:46 PM
Hey thanks for all the help..I went and got a Asus P5A board in an ATX Aopen case.With the AMD350 chip running at 400mhz at 39c.So no more pcchips info for me http://www.sysopt.com/forum/smile.gif http://www.sysopt.com/forum/smile.gif anyway thanks for all your help!!!!