netsurfer
01-26-2000, 06:13 PM
...while I sit here as my ancient Micropolis SCSI 9.1 UW drive defrags. The transfer rate is rated slower than my IBM 10.1 7200rpm drive! sheesh.
91,000 out of 1,108,400 done. and it's going at like +512 every 3 seconds. AHHH!
Can't wait for a new hard drive... That Maxtor DiamondMax40 Plus 7200 looks nice... but it's not even available in most places yet! *groan*
Guess I should start studying for my finals. :p
On another note, while trying to burn a CD with Nero, I got an error after a minute and instant coaster. GRR. well, here's the log.
Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1020), size=45056 bytes, created 7/15/99 4:06:00 AM
ahead WinAspi: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=0, 98, 0, 0, size=184385 bytes, created 6/30/99 3:06:36 PM
Nero Version: 4.0.7.5
Recorder: <YAMAHA CRW4416S> Version: 1.0h - HA 1 TA 3 - 4.0.7.5
Adapter driver: <aic78u2> HA 1
CD-ROM: <TOSHIBA DVD-ROM SD-M1202>Version: 1020 - HA 2 TA 1
Adapter driver: <ESDI_506> HA 2
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
RW-Sync : 0->0
Low/up drv buf : 70/90%
BUFE : 0
Drive buffer : 2048kB
Physical memory : 127MB (130572kB)
Free physical memory: 0MB (0kB)
Memory in use : 66 %
Uncached PFiles: 0x1D
Wizard: Off
CD-Image
26.1.2000
1:30:53 PM #1 Phase 36 File dlgbrnst.cpp, Line 897
Start of burnprocess at 4x (600 KB/s)
1:32:18 PM #2 SCSI -1135 File Cmdqueue.cpp, Line 783
SCSI Exec, HA 1, TA 3, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x0A
CDB Data: 0x2A 0x00 0x00 0x00 0x0D 0xD0 0x00 0x00 0x1A 0x00
1:32:18 PM #3 CDR -1175 File Cdrdrv.cpp, Line 2526
Internal trace
AllocBuf: Timeout for buffer allocation reached (>= 500ms)
SCSI Buffer: 47040 of 20971520 bytes free (low 47040, high 0)
1:32:18 PM #4 mmc 3082 File Transfer.cpp, Line 2534
Write error, padding blocks added
1:32:18 PM #5 TRANSFER -20 File Transfer.cpp, Line 2539
Could not perform Write
1:32:18 PM #6 IMAGEGEN -5 File ImageGen.cpp, Line 409
Could not perform Write
CD-ROM Mode2/XA
1:32:18 PM #7 TRANSFER -29 File Transfer.cpp, Line 1335
>>> 02:45.53 <<<
1:32:18 PM #8 IMAGEGEN -10 File ImageGen.cpp, Line 660
Image was written as DAO.
DAOI:
MediaCatalogNumber=''
TocType=0x20
Finalized=0x01
FirstTrack=0x01
LastTrack=0x01
ISRC=''
Blocksize=2336:
TrackMode='TRM_DATA_MODE2_2336'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=0 Index1FilePos=350400 NextTrackFilePos=696312544
CUES:
000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
003: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=66:12.29 ( 297929)
1:32:18 PM #9 Phase 38 File dlgbrnst.cpp, Line 897
Burnprocess failed at 4x (600 KB/s)
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4, 0, 0, 3, size=29771 bytes, created 1/12/00 10:51:06 PM
File 'IoSubsys\NeroApix.vxd': Ver=0.98, size=21270 bytes, created 7/1/99 6:04:22 PM
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (077), size=207238 bytes, created 9/23/99 10:48:10 AM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 5/11/98 8:01:00 PM
91,000 out of 1,108,400 done. and it's going at like +512 every 3 seconds. AHHH!
Can't wait for a new hard drive... That Maxtor DiamondMax40 Plus 7200 looks nice... but it's not even available in most places yet! *groan*
Guess I should start studying for my finals. :p
On another note, while trying to burn a CD with Nero, I got an error after a minute and instant coaster. GRR. well, here's the log.
Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1020), size=45056 bytes, created 7/15/99 4:06:00 AM
ahead WinAspi: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=0, 98, 0, 0, size=184385 bytes, created 6/30/99 3:06:36 PM
Nero Version: 4.0.7.5
Recorder: <YAMAHA CRW4416S> Version: 1.0h - HA 1 TA 3 - 4.0.7.5
Adapter driver: <aic78u2> HA 1
CD-ROM: <TOSHIBA DVD-ROM SD-M1202>Version: 1020 - HA 2 TA 1
Adapter driver: <ESDI_506> HA 2
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
RW-Sync : 0->0
Low/up drv buf : 70/90%
BUFE : 0
Drive buffer : 2048kB
Physical memory : 127MB (130572kB)
Free physical memory: 0MB (0kB)
Memory in use : 66 %
Uncached PFiles: 0x1D
Wizard: Off
CD-Image
26.1.2000
1:30:53 PM #1 Phase 36 File dlgbrnst.cpp, Line 897
Start of burnprocess at 4x (600 KB/s)
1:32:18 PM #2 SCSI -1135 File Cmdqueue.cpp, Line 783
SCSI Exec, HA 1, TA 3, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x0A
CDB Data: 0x2A 0x00 0x00 0x00 0x0D 0xD0 0x00 0x00 0x1A 0x00
1:32:18 PM #3 CDR -1175 File Cdrdrv.cpp, Line 2526
Internal trace
AllocBuf: Timeout for buffer allocation reached (>= 500ms)
SCSI Buffer: 47040 of 20971520 bytes free (low 47040, high 0)
1:32:18 PM #4 mmc 3082 File Transfer.cpp, Line 2534
Write error, padding blocks added
1:32:18 PM #5 TRANSFER -20 File Transfer.cpp, Line 2539
Could not perform Write
1:32:18 PM #6 IMAGEGEN -5 File ImageGen.cpp, Line 409
Could not perform Write
CD-ROM Mode2/XA
1:32:18 PM #7 TRANSFER -29 File Transfer.cpp, Line 1335
>>> 02:45.53 <<<
1:32:18 PM #8 IMAGEGEN -10 File ImageGen.cpp, Line 660
Image was written as DAO.
DAOI:
MediaCatalogNumber=''
TocType=0x20
Finalized=0x01
FirstTrack=0x01
LastTrack=0x01
ISRC=''
Blocksize=2336:
TrackMode='TRM_DATA_MODE2_2336'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=0 Index1FilePos=350400 NextTrackFilePos=696312544
CUES:
000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
003: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=66:12.29 ( 297929)
1:32:18 PM #9 Phase 38 File dlgbrnst.cpp, Line 897
Burnprocess failed at 4x (600 KB/s)
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 5/11/98 8:01:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4, 0, 0, 3, size=29771 bytes, created 1/12/00 10:51:06 PM
File 'IoSubsys\NeroApix.vxd': Ver=0.98, size=21270 bytes, created 7/1/99 6:04:22 PM
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (077), size=207238 bytes, created 9/23/99 10:48:10 AM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 5/11/98 8:01:00 PM