//flex table opened by JP

Click to See Complete Forum and Search --> : How can I get any better?


Dkay
11-16-1999, 11:06 AM
system specs:
BP6
dual 433's week 27's. Numbers indicate that they were next to eachother on the line.
128 MB PC100 Ram
TNT2 Ultra AGP
3com 10/100 nic
SB LIVE
VooDoo II 12 meg

Well I believe I have proper cooling. Silicon Thermal compound inbetween chips and alphas. also on on 440 BX
YS tech 60 MM fans on top of Alphas.(blowing towards chips)
2 120 MM 131 CFM case fans
1 blowing cool air from outside of case onto the top of chips
Other as a blowhole on top.
486 Fan on BX chopset
PS fan blowing out
YS tech 60 MM fan exiting air under PS blowing out.

Temps:

Idle:
MB 24DC
CPU 1 24 DC
COU 2 24-25 DC

Running RC5 after an hour or so.
MB 30-31
CPU 1 27-28
CPU 2 30-31

Celerys are running 433@589 with 2.05 Volts to each CPU.
Ok Finaly /forum/smile.gif
I was wondering of someone could help me get to 605 I have tried it at 2.1 and 2.2 I can get into windows but I it is not stable and will only run RC5 for about 3 minutes. I have peltiers but they are a pain in the **** and they seemed to make it worse.

What can i do???

Please help. I have a goal of being stable at 605.

Dkay
11-16-1999, 08:31 PM
Please respond I need some input.
Thanks

Sterling_Aug
11-16-1999, 08:56 PM
Have you tried reversing the fans on the Alpha's? I use mine sucking air into the heatsink and blowing it away.

You could try peltiers with a water cooled block, but without that, I doubt that you will ever see 600 MHz.

Dkay
11-16-1999, 09:22 PM
Yes I have tried that and this way works much better for me. The other way goes AGAIST the way the rest of the case airflow is designed.

I have a pelteir and I tried one of them and it did not seem to work.
Probally my fault but the temp was worse with it

KillerBug
11-16-1999, 10:45 PM
Get some 40W pelitiers, get 2 external 9v AC adapters, and seal them up with blue silicone caulk. These are 12v devices, but for socket 370, you dont want too much power on them.

Dkay
11-17-1999, 07:09 AM
I have 50 watt pelteirs.
I am asuming you wrote this BEFORE you burnted up your PII???

Sorry man.

Dkay
11-17-1999, 07:12 AM
Sorry for double post

[This message has been edited by Dkay (edited 11-17-1999).]

Dkay
11-22-1999, 11:06 AM
Just wondering if their were any more comments?
Suggestions?
Ideas?