81 Mhz FSb on Abit BE6 Mobo?

[Simon_wilmer]

Is it possible to add more FSB options to the Soft Menu FSB options on the
Abit BE6 mobo? I can run at 563Mhz (75Mhz FSB) with the Intel fan but wth an
FSB of 83 it crashes before it gets to Windows. So an FSB of 81-ish might be
more stable. Does anyone know of a way of doing this?

Cheers,
Si

[rl]

just curios your at 563 with a 75mhx fsb, that means your multiplyer is in the 7.5 range, what chip are you using???????

[Simon_wilmer]

I'm using the Celeron 500.

[rl]

cool, thats good you got it that high if you have all the settings that a bh6 has (im not familiar with be6) then you should be able to get close to 6, but if its like the bm6 woth 66,75,83,100 than i doubt it will run with a 100 mhz bus, stuck with 75, you should be able to go to 83 check your soft menu, disable speed hold frequency low and it should run, maybe bump the voltage a hair

[Simon_wilmer]

Thanks for that.

What's a good temp for the CPU to run at? Mine seems to be running around 45C according to the Temp probe. Is this too high perhaps?

Cheers,
Si

[chad174]

no 45c is good, of course if you got an alpha or globalwin or peltier you would be able to o/c more...i have a celeron 333 o/c to 516 mhz, soon to be like 560 with a peltier/hs combo...

[chad174]

no 45c is good, of course if you got an alpha or globalwin or peltier you would be able to o/c more...i have a celeron 333 o/c to 516 mhz, soon to be like 560 with a peltier/hs combo...