chad174
06-23-1999, 01:27 AM
what speeds would i prolly get out of a 366 celeron a with a abit bh6???500 mhz at least???
Click to See Complete Forum and Search --> : USUAL O/C SPEED FOR 366A CELERON??
chad174
06-23-1999, 03:12 PM
someone help me with this plz!!
spdsk8r
06-23-1999, 03:30 PM
First of all, I kind of doubt you'll get over 500Mhz, but it's possible. First try burning it in...
Run it at 458Mhz (5.5X83) for a day or two at 2.2V / 100% CPU load - use the D.net client
go here for more info. about d.net:
http://www.sysopt.com/rc5team.html
The client uses 100% of your CPU's idle time, so it's forcing your CPU to work at 100%, but doesn't slow your performance because it's using idle time.
Then try setting it to 550Mhz (5.5X100) if you're lucky it'll work, only about 10-15% will make it at 550 - my C366 worked perfect at 458Mhz / 1.9V, but wouldn't post at 550Mhz no matter what I did.
- - - Also, make sure you have good cooling - that's the key to reachin higher speeds
Run it at 458Mhz (5.5X83) for a day or two at 2.2V / 100% CPU load - use the D.net client
go here for more info. about d.net:
http://www.sysopt.com/rc5team.html
The client uses 100% of your CPU's idle time, so it's forcing your CPU to work at 100%, but doesn't slow your performance because it's using idle time.
Then try setting it to 550Mhz (5.5X100) if you're lucky it'll work, only about 10-15% will make it at 550 - my C366 worked perfect at 458Mhz / 1.9V, but wouldn't post at 550Mhz no matter what I did.
- - - Also, make sure you have good cooling - that's the key to reachin higher speeds
SysOpt.com
Copyright Internet.com Inc. All Rights Reserved.
Copyright Internet.com Inc. All Rights Reserved.