//flex table opened by JP
PDA

Click to See Complete Forum and Search --> : Epox MVP3 No Post at 100mhz

MaxVal
03-08-1999, 01:23 PM
I'm using this super 7 board with a P233mmx cpu. Voltage is set for 3.0V. Video is AGP Matrox G-200.
Works fine at 75X3.5, IBM Deskstar does not like 41.5mhz. buss. Can't get video at 100X2, 2.5, etc. - even if jumper is set for PC66 ram.
Replaced video card w?Matrox Mystique-SAME!
Has anyone any ideas why this won't work?
tpetre
03-13-1999, 02:24 PM
raise voltage to 3.3 to 3.5 range and try 3x100.
CMonster
03-13-1999, 06:00 PM
Rasing the voltage a little at a time may help, and try setting it to 2x100 with the jumper for memory set for non- PC100, if it works then try it with the memory bus at 100mhz. Then increase things one at a time in increments.