Best bet with an P120 on an apollo mainboard

[rYan21]

This is my old com (see subject) it has a 60mhz bus speed witha 2x multiplyer. WHat would be my best bet to o/c clock it??????

Thanks in advance

[Jeff]

Well, I don't know what bus speeds your motherboard supports, but 2x66(133) will most likely work, and if your board supports 75Mhz, it may work at 2x75(150). If neither of them work it may be worthwhile to try 60x2.5(150). If you are feeling lucky then maybe you could try 66x2.5(166), and if you have a good chip and a peltier 75x2.5(190) is a long shot. Also, if you are very lucky and have an 83Mhz option you may want to give 83x1.5(125) a shot, it wouldn't stress the CPU too much but your peripherals and RAM may not like it. Do not ever use a 50Mhz bus as it is much slower than a 60 or 66Mhx bus, even if you have a significantly higher clock rate. Good luck and happy cooking!