GCT-8STB Motherboard and Intel 233 MMX

[sideshow]

can you let me know what all your JP settings are at for the 233MMX on the GCT-8STB board. I would like it to run at 233 or 266. I have been working on this for days and can't get it to run. I would really appriciate any help you can provide me.

[knucklebusted]

I've got one running for a friend, close to a year now, at 3.5*75. The jumpers should be as follows:

JP4 - A = 1-2, B = 1-2 (Dual Voltage)
JP8 = E (2.8 volts)
JP3 - A = 1-2, B = 2-3, C = 1-2 (75mhz bus)
JP7 - A = 1-2, B = 1-2 (3.5 multiplier)

See if that works for you. Of course make sure you have a good fan and heatsink. His barely runs warm to the touch with a good HS/Fan combo and a front mounted case fan.

[sideshow]

Knucklehaed, your the greatest! Got. Thanks muchly!

Sideshow

[knucklebusted]

Glad to help. Just to let you know, I cooked a K6-2/300 on one of these boards. The BIOS (which I can not find support for any more) doesn't support the K6-2 either. If you figure out how to get anything better than 300mhz on it, let me know.