Burn baby burn

[pubik]

Hi I've an Asus P5A and a K6II-400.
My ATX power give 3.3v max.
<<<
I overclock the cpu to 495MHz(100*5x)and at the normal voltage of 2.2v nothing appens.
<<<
At 2.4 there's a boot but Wn98 say me "Protection error"
<<<
At 2.6 all works but certain application crash or give errors
<<<
At 2.8 all WELL!
<<<
I try also to set the bus to 120(with cpu at 5x=600MHz)-->First power-on=no boot but fans and drives work
<<<
So I increase the core voltage(I'm CRAZY!!)to 3.5v and the system dead forever
<<<
For all tentatives I turn off the system work directly with the alimentation cable because the switch doesn't work
<<<
At the end of this bad work touching the cables and port(like com or parallel)I have an elettric shock.
<<<
What is dead?
The CPU?
The MB?
ALL
The power supply?

Please I need your help
TX

[Mark]

Try swapping out the power supply.

Mark

[CONTRiC]

Most likely the cpu is dead. The mainboard and the rest of the components were made to do that sort of stress (but the cpu was not, hence overclocking) http://sysopt.earthweb.com/forum/smile.gif I'd swap out the cpu and go from there (there could be other problems). But that's where i'd start http://sysopt.earthweb.com/forum/smile.gif

[alpha]

I'd say that increasing the core to 3.5v shorted out the cpu with the same VIO and VCORE plane of something