Mixing Ram

[kumm3]

is it safe to mix 64meg of pc133 with 64meg of pc100?

[chipbgt]

Hi Kumm3,

From what I know (which usually isnt much)
There shouldn't be any problem of running them together...although I think the pc-133 will only run at 100 unless you bump the fsb to 133 and can get the 100 to overclock...make sense? someone back me up here.

[This message has been edited by chipbgt (edited 02-15-2000).]

[narayan]

chipbgt, you are correct sir. the pc 133 will not run at 133 with the pc100 in there. It will only run as fast as the sloweast RAM. lose the pc100 if your fsb will be over 100. Welcome kumm3 http://www.sysopt.com/forum/smile.gif

[This message has been edited by narayan (edited 02-15-2000).]

[scotter]

check this artical out it is very good at telling what why and when with memery http://www.sysopt.com/forum/smile.gif
http://www.ctnews3d.com/news/n2.html


[This message has been edited by scotter (edited 02-15-2000).]

[GIMOER]

What?I'm using 96 meg of generic pc100 at 133mhz.I don't think the pc133 will only run at 100mhz if mixed.Not very likely.

[Kenny Graves]

Currently I am using 2 128 pc100 sticks and 1 128 meg pc133 stick system works fine. The fastest stick will run at the slowest sticks speed.