SOYO-5EMA-Ver 1.5 Beep Codes

[Bleep]

Posted this over at another bbs with no result. Anyone here got any advice?
New board-new case and PS. Used static strap, 64 Megs ram-AMD 350 After a no boot removed all cards and everything else on MB except
ram and cpu. Still get 2 beeps blank-3 more beeps. Replaced ram and cpu same thing. Rechecked all dip settings and jumper settings.Reset CMOS. Same beeps. Backed ram down to 66 mhz-no help.
Set FSB to 66 to try and remap the ctx core on the cpu. same results. Ram is in slot 3. I think the board is KAPUT but if anyone has
any other ideas I sure would appriciate it.
Bleep

[This message has been edited by Bleep (edited 02-04-2000).]

[socalgal]

Try looking at these beep codes' pages

http://www.pctusa.com/pcerror.htm

http://www.randomc.com/~dperr/beepcode.htm


Chances are your memory is not seated properly (you really have to push them in hard on some mobos!), incompatible, or bad...

Hope this helps.

[Bleep]

Well When the memory is removed from the MB I only get 1 beep. I have come to the conclusion that it is the Video card. This was a MB upgrade from a crashed system. There was a CD rewritable in the CD RW that of course could not be removed unless the software is running. I plugged in the CD rewriter hit the eject button and it ejected the CD. So the system must be running except for Video. Crazy way to troubleshoot but worked. |Thank you for the links to the BIOS beep codes
Bleep

[socalgal]

Great! Glad to hear you got it working. Also good to see how you solved this, thanks. http://www.sysopt.com/forum/smile.gif