TV card

[Jim The Tim]

It worked for mounths then it gust stoped why?

[Axel]

Hardware tends to do that for several different reasons - Here are a few possibilities -

Your system is running hot and you fried a chip or two in the card - time for a new card.

The card driver has become corrupted and isn't loading correctly - have you tried uninstalling and reinstalling the card in add hardware after doing a scandisk/defrag of your hard drive in safe mode?

The PCI bus drivers are bad - check out system icon in control panel and see if it indicates a problem in device manager for your PCI bus. Reload as needed.

The card may be working, but the cable to the TV might be the issue - try replacing the cable.

The card may be fine, but came loose in the PCI slot - remove card after powering down and replace card - do a remove/add in the software in control panel and see if the system detects the card.

The card & cable are fine, but the antenna lead is damaged or loose - replace antenna connection if you have one -

The TV isn't working - nothing's wrong with the card.

So - tell us if any of this helped and what you've tried so far and we'll go from there.