LS120 disk is seen as 720K

[gene1938]

Mitzubishi LS120- win98se when I put a 120 disk into Ls120 it wants to format so I tell it ok it comes back and says invalid disk size, do you want to format to 720k. drive shows in bios as LS120. what am I missing?
thanks gene

[kwai]

are you sure that your motherboard bios supports the ls120? if not you might try and update your bios, but be careful and read all the instructions.

if it does, you might need to go into the bios settings when your system first boots up and check for any floppy/ls120 settings.

[gene1938]

it does show in the bios as A LS120. Bios is the latest version, there must be something in the bios I'm missing. It does show up in the device manager as a LS120 & a floppy.when I remove the floppy from the device manager, it takes the LS reference with it. upon rebooting system finds a floppy and installs a driver for it. Back to square one

[Susan]

If you are using WIN98, there is no driver necessary, here's the site for you to check out what you may need to change with instructions on installing.
www.superdiskdrive.com/storage/ls120/support/index.html (http://www.superdiskdrive.com/storage/ls120/support/index.html)



[This message has been edited by Susan (edited 01-19-2000).]