//flex table opened by JP
PDA

Click to See Complete Forum and Search --> : Abitbx6 rev2 with celery366

cruzlow
11-06-1999, 04:39 PM
Hello everyone,Well the question is that im having trouble with cpu temps.Every hardware monitoring device that i install says the cpu is over heating why? And this really worries me alot. I have opened the cas and i touched the heatsink and its luke warm? So it dont feel hot just warm? This has me stumped. Can anyone shed some light on this and what should i do to get this celery cooler. Thanks for any info.
Mntsnow
11-06-1999, 05:25 PM
you mentioned that you have a Version 2 of the bx6 board. YOU are NOT reading the actual temps due to it MISSING a couple of parts. http://www.benchtest.com/rt2.html
read that for some more insite. You can use the "cable thermister probe" and set Motherboard monitor to windond3 and get the temp from the probe (try to get the tip of the probe under the heatsink right next to the cpu slug for the most accurate reading.

Mntsnow